|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
ISO 105 SAE JI885 High Quality Xenon Lamp Aging Environmental Test Chamber
Product Description:
The Xenon lamp aging test chamber uses imported 6500W long-arc
water-cooled xenon lamp as the light source. it simulates the
comprehensive conditions of light, heat and rainfall of the outdoor
climate by changing and controlling the light irradiance,
temperature (sample holder temperature, working room temperature),
relative humidity, spray method, etc., then artificial aging tests
are performed on the samples. This equipment complies with multiple
test methods such as GB, ISO, ASTM, etc., and is suitable for
laboratory light source exposure tests for various materials and
products such as coatings, plastics, rubber, chemical building
materials, and auto parts.
Technical Parameters:
| Dimensions | 124cm×114cm×202cm (W×D×H) |
| Exposure area | 6500cm2/ About 65 standard samples (140mm×70mm) |
| Light source | 6.5kW long arc water-cooled xenon lamp (imported from the United States Q-LAB) |
| Light source life | About 2000h (based on irradiance 0.51W/m2 @340nm) |
| Irradiance display band | 340nm,420nm,300～400nm optional |
| Irradiance range | 0.3W/m2～1.1 W/m2(@340nm) 40 W/m2～120 W/m2(@300nm～400nm) |
| Sample temperature | Blackboard temperature: 40℃～110℃ Black mark temperature:40℃～120℃ |
| Temperature in the chamber | 38℃～80℃ |
| Humidity in the chamber | When illuminated: 30%RH～75%RH (related to temperature) In the dark: up to 100%RH |
| Test Conditions | Free combination of light, darkness and water spray |
| Supported test standards | Conforms to SAE J2412, SAE J2527, ASTMG 155, ISO 105-B02, ISO 105-B04, ISO 105-B06, ISO 4892-2-A, SO 11341-1, GB/T 16422-2,GB/T 1865, etc. With 4 custom methods, users can set test parameters by themselves to meet most common standard requirements.
|
Equipment Features:
Comparisons between our Xenon Ageing Test Chamber with others in the markets:
| SN883-X65 | Others | Comparison results | |
| Cooling system | Water cooling system | Mainly air cooling system | SN883-X65 can reach a higher power level to meet the needs of
current and future test development. There is cooling water flowing
between the filters, which can effectively reduce the infrared heat
to the sample surface. And reduce the generation of ozone, increase
the accurate matching with the external environment. Cooling effect: water cooling is better than air cooling. |
| Lighting source | Orignial 6500W xenon lamp tube imported from the United States Brand: Q-LAB | Domestic lamps (mostly produced by Shanghai Aojia) | Imported lamp tube: (spectral energy distribution) curve shape is
stable, and it has been specially tested before leaving the
factory. Water-cooled full-spectrum xenon arc lamp, chemical
analysis grade xenon lamp SPD spectral energy part of the whole
life almost unchanged Other domestic equipment generally uses Shanghai Aojia lamp and power supply integration, and there is uncertainty in lamp life and spectrum. |
| Irradiation intensity range | 0.3 W/m2～1.1 W/m2(@340nm) 40 W/m2～120 W/m2(@300nm～400nm) | Use long wave and for example 550w/m2 to express | SN883-X65 can reach 2 of levels which close to the sun level . Other domestic equipment is generally customized based on a certain standard and does not understand the irradiance requirements of different fields. |
| Sample area | 6500cm2 (65 standard samples: 14*7cm) | Express according to cabinet specifications | Remark: SN883-X65 is based on the American ATLAS CI4000, including the parameter specifications, the expression method is based on the exposure area. Other domestic products generally follow the expression method of temperature chamber. |
| Lamp life | 2000-3000 hours | 500-800 hours | Domestic lamps are easier to attenuate in terms of irradiance and have a shorter life span. |
| Way to control | 340nm, 420nm or 300-400nm can be switched | Generally use long wave band control | Other domestic xenon lamps are generally based on a certain standard, such as IEC65-2-5 or GB/T2324 will be expressed in 1120W/m2 or 550W/m2 |
| Blackboard temperature Black mark temperature | BPT40～110℃ BPT40～120℃ | Generally there is only one control method | SN883-X65 can independently control the temperature of the
blackboard/black mark and the temperature in the box. The switch of
BST/BPT can be selected on the control screen. There is no need to
replace any sensors, which greatly simplifies the operation.
Automatically identify and select control according to standard
requirements. The thermometer rotates at the same position as the
sample, which truly represents the surface temperature of the
sample. Other domestically produced thermometers can only be installed with one thermometer, which can be replaced manually. The thermometer is fixed in one position of the cabinet, which may not be on the sample rack. |
| Humidity range | Light cycle: 10-75%, Dark cycle: up to 100% | Light cycle: 10-75%, Dark cycle: reach 100% | Other domestically produced refrigeration compressors are used to control the temperature of the cabinet, which is better than SN883-X65, but the process of constant temperature and humidity cabinet is used, and the probe is generally exposed to the lamp, which cannot strictly meet the standard requirements. (The temperature and humidity probe of SN883-X65 adopts electronic rather than wet and dry bulb form, located at the top of the device) |
| Calibration tool | Self-developed calibrator | None or outsourcing | The calibrator is a necessary tool for evaluating equipment stability. SN883-X65's calibrator can compare and exchange data with imported equipment. Ensure that the reliability of the test data is maintained during the lamp decay process. |
| Filter combination | U.S. imported internal and external filtration system A variety of options (including daylight window glass, etc.) | Generally only daylight (domestic glass) | SN883-X65 choose the original filter set combination imported from the United States, which can be interchanged with imports. Other domestic products are generally based on the GB/2324 electronic standard, and they only know daylight filtering, and they have not analyzed the cost requirements of the filter cover. |
| Control System | 7-inch touch screen control panel displays all test parameters | Generally, domestically produced programs are adopted, and the temperature chamber control mode is used | SN883-X65:The control system can handle custom tests and process
pre-programmed tests; the information set and displayed on the
control system screen includes: blackboard temperature/black mark
temperature, test box temperature, relative humidity, and
irradiation intensity. The system has corresponding predefined test methods. The test method list includes: national standard, SAE, ISO, ASTM, etc. The operator can copy and edit existing test methods (14 factory preset test methods) or custom tests (can be stored) 12 custom programs); Other domestic products: no relevant standard switching content |
| Spray System | Provide a consistent deionized water spray for the sample, and can achieve back spray | Using ordinary pure water, only the front spray function | SN883-X65 has a spray system that can be sprayed on both sides, and
the surface of the sample will gradually become dry during the
rotation process. Each revolution is equivalent to a rain shower
outdoors, accelerating the simulation of outdoor rainfall. Other domestic products generally do not understand the standard requirements. |
| Test standards | Meet most of the standard requirements (including national standards, international standards) | Meet a small number of national standards | SN883-X65 can meet more standard requirements |
| Inner Dimension | W:124 cm D:114 cm H:202 cm(Including top inlet and exhaust ports) | Ordinary dimensions | SN883-X65 has large working volume |
