|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 60335-2-23 Wire Frame and 200mm Wooden Sphere for Helmet-type Hairdryer Normal Operation Testing
Product overview:
This wire frame and wooden sphere device meets the requirements of IEC60335 -2- 23 clause 3.1.9, figure 101.
A dull black-painted wooden sphere with the diameter of 200mm, and a wire frame consisting of 32 equally spaced wires φ1.5mm±0.5mm.
Technical Characteristics:
| Applied Standards & Clauses | IEC60335 -2- 23 clause 3.1.9, figure 101 |
| Wire Fram Diameter | Ф200 mm |
| Wire Fram Height | 110 mm |
| Wire Fram Top Hole Diameter | Ф18 mm |
| Wires Diameter | Ф1.5±0.5 mm |
| Wires Quantity | 32 pieces |
| Wooden Sphere Diameter | Ф200 mm |
| Wooden Sphere Color | Black-painted |
How to process the normal operation test for Helmet-type hairdryers? (Extracted from IEC 60335-2-23:2012 clause 3.1.9)
Helmet-type hairdryers are operated with the axis of the hood inclinded at an angle of 60° to the horizontal or the maximum angle allowed by the construction if this is less. A dull black-painted wooden sphere, 200mm in diameter, is placed in the hood so that its centre coincides with the axis of the hood, the shortest distance between the sphere and the air-outlet grille being 50mm.
Hairdryers having a flexible hood attachment are operated with the hood attachment placed over the wire frame of Figure 101, the frame being positioned over the wooden sphere.
Note 101 Helmet-type hairdryers that are supported by the head are operated as hairdryers having a flexible hood attachment.
