|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 60065 Corrosion-Resistance Metal 230° Rotating Angle Mandrel Test Apparatus
Product Overview:
This test apparatus conforms to IEC60065:2014 clause 8.21, figure 14~16, IEC60558-1 Fig6, IEC 60950 and etc. It is used for tensile and electrical strength verification for non-separable thin layer materials.
This test apparatus has the mechanical limits in the position of 0o and 230o to make sure the accuracy of the testing angle.
Technical Parameters:
| Mandrel Material | Made of corrosion-resistance metal |
| Bracket Material | Aluminum profile |
| Weights | 1N*2,50N*2 (with through hole), 50N*1 (including the weight of hanging hook and clamping device for specimen) |
| Force of the two terminals of material foil | 1N (two sets of 1N weights, also the clamping device for metal foil) |
| Rotating angle of the mandrel | 230 o |
| Height of the mandrel to the bottom of the device | 500mm |
How to rotate the mandrel to 230° position:
Pull out the position locking pin, then the mandrel is rotated from 0°limit position to 230°limit position, then the position locking pin is locked. Please refer to following picture.
