|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
Cordless Kettles Irons Blenders Stand & Withdrawn Endurance Test Machine
Standards & Clauses:
IEC60335-2-3:2015 “Household and similar electrical appliances-Safety-Part2-3:Particular requirements for electric irons” clause 22.105
IEC60335-2-15:2016 “Household and similar electrical appliances-Safety-Part2-15:Particular requirements for heating liquids” clause 22.103
IEC60335-2-14:2016 “Household and similar electrical appliances-Safety-Part2-14:Particular requirements for kitchen machines” clause 22.103
Samples and Restrictions:
Household or similar electrical appliances such as cordless irons, cordless kettles, cordless coffee makers, cordless blenders.
Application:
The appliance coupler of cordless appliances shall be constructed to withstand the stresses occurring during normal use, which is verified through insertion and withdrawn testing.
Test Principle:
The two live pins of the cordless appliance (such as cordless
irons, cordless kettles, cordless coffee makers, cordless blenders)
are connected together and an external resistive load is connected
in series with the supply. The external load is such that the
current is 1.1 times rated current. Then the cordless appliance is
placed on its stand and withdrawn at a rate of approximately 10
times per minute through the servo motor drives the lifting
mechanism. The test is continued without current flowing for a
further 10000 times for cordless kettles and cordless coffee makers
and 6000 times for other cordless appliances.
Built-in load or external load can be optional for this test
equipment, the test times can be preset (max. 999999 times), the
test time and conduction times can be recorded automatically, the
testing will be stopped automatically after the preset test times
are completed.
Structure:
Adopts floor-standing structure, with 7" touch screen.
Equipment dimensions: about: 1200 × 500 × 1200 (mm) W × H × D
Equipment weight: 140kg
Power Supply:
Power supply:AC220V±10%/50-60Hz,0.3KW or match the customer's local power supply.
Technical Parameters:
| Test Station | Single |
| Control Method | PLC intelligent integrated control, 7-inch humanized touch screen operation |
| Drive Mode | Servo motor drive |
| Sample Clamping Method | Mechanical clamping, the position of clamping point is adjustable; default with clamping fixture for cordless kettles, the clamping fixtures for cordless iron, cordless blenders and other cordless appliances should customized. |
| Stand & Withdrawn Stroke | 0-100mm, can be preset on touch screen |
| Test Times | 0-999999 times, can be preset |
| Conduction Times | 0-999999 times, can be displayed on the touch screen |
| Load Power Supply | Built-in voltage 0-250V,current 0-15A adjustable, Without built-in voltage and current can be optional |
| Judgment | According to whether the current is conducting or not |
| Test Contents | Cordless electric iron stand and withdrawn test (with/without load power supply); cordless kettle / cordless coffee maker stand and withdrawn test (with/without load power supply); cordless blender stand and withdrawn test (with/without load power supply) |
