|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 62133 Power Li-ion Battery and Cell Free Fall 1 M Pneumatic Drop Test Equipment
Overview:
This battery free fall testing machine applies for small consumer electronic products like mobile phone, mobile batteries, interphone, electronic dictionary, CD/MD/MP3, and components free dropping testing; specimen is automatically lift to pre-setting height, then free dropped onto a concrete plate.
Standards Compliant:
It is confirm to IEC62133:2017 clause 7.3.3, IEC62133:2012 clause 7.3.3, 8.3.3, IEC60086-4:2014 clause 6.5.6, IEC 60086-1, etc.
Technical Parameters:
| Drop Height | 300～1500mm (can be customized. The range is controllable, with steel ruler, the min. indication value :1mm) |
| Height Display | Stainless steel ruler (min.indicator value:1mm) |
| Drop Orientation | Face, edge, corner dropping |
| Loading Capacity | 0～2kg (can be customized) |
| Specimen Max. Dimension | L150*W200(MM) (can be customized) |
| Drop floor material | Steel plate (hard wood board, marble board, acrylic board and cement board can be optional) |
| Machine Power | 0.75KW |
| Drop method | Free fall through pneumatic dropping |
| Lifting method | Motor lifting |
| Power Source | 220V 50Hz or 110V 60Hz (can be customized) |
| Air Source | ＜1mpa (prepared by client) |
| Control Method | Button Control |
Special test procedure as per IEC 60086-4:2014 clause 6.5.6:
The test batteries shall be dropped from a height of 1 m onto a concrete surface. Each test battery shall be dropped six times, a prismatic battery once from each of its six faces, a round battery twice in each of the three axes shown in Figure 5. The test batteries shall be stored for 1 h afterwards.
Clamping & Releasing Device for Specimen
