|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 60320-1 Single station Coupler Pulling Test Equipment Connector Test For Household
Standards For Coupler Pulling Test Apparatus:
IEC60320-1:2021 "Appliances couplers for household and similar general purposes- Part1:General requirements" clause 23.3 and figure 19.
Test principle For Coupler Pulling Test Apparatus:
Insert the connector into the device inlet corresponding to the type of connector to be tested and in accordance with the relevant standard table, and apply a lateral force to it using a spring force mechanism.
Technical parameters For Coupler Pulling Test Apparatus:
Test station | Single station |
Flexible cable bending height | 40±2 mm,adjustable |
Power supply | AC 220V, ±50Hz |
Working temperature | 5-35℃ |
Humidity | 30%-90% |
Pull force range | 0-100N |
Pulling method | 50 times in one direction and then 50 times in the opposite direction |
| Cable selection and corresponding pull value table |  |
| Appliance input socket | Optional gauge according to requirements |
Structure For Coupler Pulling Test Apparatus:
The connector test shall be equipped with an appliance air inlet corresponding to the connector model to be tested and in accordance with the relevant standard table.
