IEC 62368-1 Clause Y.4.5 Stainless Steel RT～300℃ Constant Oil Immersion Test Chamber

IEC 62368-1 Clause Y.4.5 Stainless Steel RT～300℃ Constant Oil Immersion Test Chamber

Product Information:

This oil immersion test equipment complies with ASTM D471-98, IEC 62368-1: 2018, Section Y.4.5, etc.
The tester is suitable for testing the oil resistance of rubber, plastic enameled wire or insulator.
Test method: Immerse the specimen in hot oil, then remove the specimen and test its tensile strength. If the test piece is enameled wire, check the paint film quality.

Instrument composition:

1. Dumbbell test cup (stainless steel): 6 pieces, height 300mm (or custom).
2. Test cup cover material: six pieces of corrosion and temperature resistant advanced rubber (tight plug) or six pieces of aluminum plug (loose plug).
3. In the workshop (space for holding the test cup for insulation and heating): 320 x 300 x 350 mm, stainless steel.
4. With sample isolation and suspension device (6 pieces, each corresponding to a test cup, each device can be suspended 3 dumbbells).
5. Built-in hybrid cycle mode, hybrid power: 40 W.

Temperature control and insulation system:

1. Imported intelligent PID constant temperature and high precision k-type thermocouple transducer.
2. Heater: electromagnetic heater, power: 3000 W
3. Temperature range: room temperature: + 20 °C ~ 300 °C, instrument display accuracy: 0.1 °C, oil temperature uniformity: ± 1 °C
4. With super high temperature protection function, can automatically cut off and stop heating after over temperature, effectively protect the safety of equipment.
5. Automatic power off when oil level is insufficient; High temperature splash protection of test oil
6. Volume: 400 X 530 X 550mm, Inner and Outer Box: Stainless Steel
7. Time Set: 999.99 H / M / S