|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 60884-1: 2022 Conductor Damage Degree Test Equipment For VDE Type Plugs Sockets
Product Information For Conductor Damage Degree Test Equipment:
Standard: IEC 60884-1:2022 clause 12.2.5 figure 11, IEC 60669-1:2017 clause 12.2.5 &12.3.10 figure 9, UL486A-B, etc.
Application: This device is use to check whether the terminals with screw and screwless terminals can bears the mechanism force under normal operation. Mainly use to judge whether the design and structure of screw clamping terminals meet the requirement of clamp the conductors without excessive damage.
Test sample: Terminals, connectors
Feature: Adopt the structure of guide rail. Can preset test times, while testing, tester will automatically stop when preset test times completed, and output sound alarm signal.
Technical Parameters For Conductor Damage Degree Test Equipment:
| Applied standard | IEC 60884-1: 2022 |
| Applied clause | 12.2.5, figure 11 |
| Test sample | Terminals, connectors |
| Test rate | 10±2 RPM |
| Diameter of gyration | 75mm (and 76mm for UL standard) |
| Test times | 0～9999 |
| Weights | 0.3, 0.4, 0.7, 0.9, 1.4, 2kg |
| Test height | 260, 280, 300, 320mm |
| Diameter of ferrule hole | 6.5, 9.5, 13, 14.5mm |
| Power supply | AC220V±10%, 50Hz |
