|
[China]
Trade Verify
Address: No.755, Xianyuehuan Rd, Tianyuan District, Zhuzhou, Hunan Province
Contact name:Shirley
Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co.,Ltd |
|
Verified Suppliers
|
|
|
3312sinter-HIP furnace integrated negative pressure debinding,vacuum sintering,rapid cooling functions
3312 sinter-HIP furnace
Application:
Used for debinding of high performance cemented carbide materials.It can realize negative pressure dewaxing process (forming agent is paraffin), vacuum sintering, partial pressure sintering, pressure sintering, rapid cooling and other batch production operations and research and development operations in the laboratory.It can sintering carbide blades, ceramic blades, extruded bar products and special-shaped products and other powder metallurgy products.
Technical parameter:
| Type | ZZRDE-SINTER-HIP FURNSCE5512 |
| Effective working zone(mm) | 300×300×1200 |
| Maximum loading weight | 250KGS |
| Heating power | 300KVA |
| Max.design pressure | 0.6MPa |
| Max.working pressure | 0.6MPa |
| Max.design temperature | 1600℃ |
| Max.working temperature | 1500℃ |
| Temperature control mode | 3 zone temperature control |
| High temperature uniformity | ≤±5℃ |
Max.heating up speed (empty furnace) | 15℃/min(≤1000℃)； 10℃/min(1000-1520℃) |
| Ultimate vacuum degree | ≤4 Pa |
| Vacuum leakage rate | ≤4 Pa /h |
| Wax yield rate | ≥98﹪(paraffin) |
After sales:
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's
notification, both within a week to carry the equipment out of the
box together, then check the equipment and all components according
to the packing list . Including equipment accessories, spare parts
and special tools, attached manual and technical documents, etc. It
can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted
according to the technical accessories.
2.Training
When taking-over the Furnace to the customer, We will give a staff
training to customer. The operating personnel of the customer
should join to commission,test the furnace, when installing at
customer’s company.
This is practical operation training and practical maintenance
training,
and our technical personnel will telling the basic
principle,equipment maintenance knowledge,And the common fault
handling measures.We can training 2 ~ 3 workers. ( Training how to
maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.
