Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co.,Ltd |
Verified Suppliers
|
|
Easy operate ----integrated vacuum dewaxing sintering furnace
Main system function:
Main including control system,heating system,positive and negative pressure debinding system,vacuum system,rapid cooling system,safety system and auxiliary system.
Application:
Mainly used for hard alloy dewaxing (Ar carrier gas dewaxing and continuous and pulse hydrogen micro-positive pressure dewaxing), vacuum sintering, pressure separation sintering, rapid cooling and other processes.The above process can be continuously treated.It can meet the strict requirements on furnace temperature uniformity and atmosphere uniformity of cemented carbide in its sintering process,the furnace structure design advanced and reasonable, easy to use operation and maintenance.The main supporting components (control components, sensors, graphite heater, thermocouple, main control valve, vacuum pump, etc.) have the international advanced level, can adapt to long-term, stable, reliable mass production requirements.At the same time, the equipment meets the national requirements of energy conservation and environmental protection.
Working environment:
1.Humidity and temperature requirement:
1.1Humidity: <90%(at 35℃)
1.2Temperature:0~+45℃
2.Power supply:
2.1Motive power supply:375~430V,50Hz,3 phase 5 wire system( Can
change according to customer environment )
2.2Control power supply:210~250V,50Hz,Single-phase( Can change
according to customer environment )
3.Water: Fully enclosed circulating water
4.Gas:
Input gas allowed: Ar,H2,N2
Technical parameters:
Service life
| 6000times / 20-years service life |
Useful space | 200×200×400mm |
Max. Loading weight
| ≥200kg
|
Max. Loading weight
| ≥200kg
|
Max. Designed temperature | 1600℃ |
Max. Working temperature
| 1550℃
|
Max. working pressure
| ≤60bar
|
Ultimate vacuum degree
| 5*10-2mbar
|
After sales:
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's
notification, both within a week to carry the equipment out of the
box together, then check the equipment and all components according
to the packing list . Including equipment accessories, spare parts
and special tools, attached manual and technical documents, etc. It
can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted
according to the technical accessories.
2.Training
When taking-over the Furnace to the customer, We will give a staff
training to customer. The operating personnel of the customer
should join to commission,test the furnace, when installing at
customer’s company.
This is practical operation training and practical maintenance
training,and our technical personnel will telling the basic
principle,equipment maintenance knowledge,And the common fault
handling measures.We can training 2 ~ 3 workers. ( Training how to
maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.