Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co.,Ltd |
Verified Suppliers
|
|
Vacuum dewaxing sintering integrated furnace(for cemented carbide and so on,absolutely high quality productivity) )
Main application
For dewaxing of high-performance cemented carbide material(It can
realize vacuum dewaxing,binder can be paraffin or PEG),Vacuum
sintering,Low pressure Argon dynamic partial pressure sintering,Low
pressure Argon static partial pressure sintering, cooling,heat
preservation and heating up under high temperature.
General structure
This kind of vacuum sintering furnace for cemented carbide
research, which is single room,horizontal type,recycle heating
furnace,it adopt graphite heating element of low voltage and large
current .It has many heating zone,each heating zone are individual
controlled .All the technical process is automatic
controlled,monitored,chased,fault diagnosed which showed and
recorded by computer.
This vacuum sintering furnace include control system,heating
system,dewaxing system(Negative pressure sintering),vacuum
system,partial pressure sintering,cooling water system,rapid
cooling system,auxiliary system and safety system etc.It’s graphite
box built-in insulation structure,must keep the best temperature
and atmosphere uniformity when sinter cemented carbide
products.Main parts are all international advanced products,can
meet production needs stably and in the long term.At the same
time,it must meet energy conservation and environmental
requirements.
Working environment:
Humidity and temperature requirement
Humidity: <90%(at 35℃)
Temperature: Insure equipment running well in user’s working
environment;
Power supply:
Motive power supply:380V,50Hz,3 phase 5 wire system
Control power supply:210~250V,50Hz,Single-phase
Total power:≥300KW
Heating power: 280KW(According to heating rate)
After sales:
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's
notification, both within a week to carry the equipment out of the
box together, then check the equipment and all components according
to the packing list . Including equipment accessories, spare parts
and special tools, attached manual and technical documents, etc. It
can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted
according to the technical accessories.
2.Training
When taking-over the Furnace to the customer, We will give a staff
training to customer. The operating personnel of the customer
should join to commission,test the furnace, when installing at
customer’s company.
This is practical operation training and practical maintenance
training,
and our technical personnel will telling the basic
principle,equipment maintenance knowledge,And the common fault
handling measures.We can training 2 ~ 3 workers. ( Training how to
maintenance and operating.)
3. warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.
If you want more details,do not hesitate to contact with us.I'm at your service!