Supply Of Titanium Anode Porous Plate Pt Ti Electrode Hydrogen
Water Cup
Material | Filter Rating | Porosity | Penetrability | Working pressure | Operating temperature | Shape | specific surface area |
Pure Titanium powder | 5um-70um | 30-45% | 3-800M³/M²hKPa | 2.0MPa | 300℃ | Round disc,sheet,tube,round bar,cap | 10-40cm²/cm³ |
Production | (Diameter)Length | (Diameter)Width | Thickness | Customized |
Sintered porous round discs | φ5-φ400mm | φ5-φ400mm | 1-20mm | Yes |
Sintered porous sheets | 1-600mm | 5-400mm | 1-20mm | Yes |
Sintered porous tubes | 100-1200mm | φ20-φ200mm | 1-10mm | Yes |
Sintered porous cartridge | 100-1200mm | φ20-φ200mm | 1-10mm | Yes |
Properties of titanium sintered porous materials:
- Pore diameter uniformity, pore stability, high separation
efficiency.
- High porosity, low filtration resistance, and high permeability.
- Good chemical stability, acid, and alkali corrosion resistance,
oxidation resistance.
- Morphological stability, no particle shedding, comply with food
hygiene and pharmaceutical GMP requirements.
- Good mechanical properties, low differential pressure, large flow.
- Strong anti-microbial ability, does not interact with
microorganisms.
- Online regeneration, easy cleaning, long service life.
- Excellent biocompatibility can be widely used in biological, food,
pharmaceutical, medical industry.
- Excellent electromagnetic shielding performance.
- Good damping and shock resistance.
Application of titanium sintered porous materials
Titanium sintered porous materials are mostly used for filtering
materials,electrodes,heat transfer materials,catalyst carrier
materials,noise canceling materials according to their physical and
structural properties.
- Decarburization filtration of pharmaceutical liquids.
- Electrolytic gas industry precision filtration, gas distribution.
- The medical industry makes biological implants.
- Water treatment industry odor sterilization filtration and ozone
aeration.
- Clarification and filtration in food and beverage processing.
- Prefiltration of reverse osmosis system for the electronics
industry.
- Terminal filtration of petroleum products in the petrochemical
industry and filtration of carbonic alkali liquid in the chemical
industry.
- High-pressure air filtration in the aerospace industry.
- Filtration and recovery of the precious metal catalyst in the fine
chemical industry.
- The electrode matrix of a fuel cell.
- Catalyst carrier in gas and liquid catalytic reactions.
Titanium sintered porous materials are allowed to use in the
environment:3% hydrochloric acid, 5% sulfuric acid, various
concentrations of nitric acid (smoke nitric acid prohibited),
chloroazotic acid, seawater, sodium hydroxide, carbonate and
chloride salts of the aqueous solution.
Precautions for the use of titanium sintered porous materials
- During installation, disassembly and clean avoid scratches,
collisions and falls on hard objects.
- Install correctly to avoid reverse filtering.
- Avoid instant pressurization when the filter element works.
- When the filtration efficiency is less than 50%, the filter element
should be cleaned in time.
- When cleaning the filter element, the first backflow with pure gas,
backflow pressure is 1.5 times the working pressure, each time for
3-5 seconds, and 4-6 times, then backwash with clean liquid for 3-5
minutes, repeat 2-3 times.
- If the filter element is not good after online back blowing and
backwashing, it should be removed and cleaned in time.