Solid Liquid Separation Sintered Stainless Steel Tube Morphological
Stable
1. Sintered stainless steel porous material product overview
Stainless steel sintered porous material is stainless steel 304,
304L, 316, 316L powder as the raw material, after screening,
molding, sintering microporous material. Stainless steel sintered porous material has excellent corrosion
resistance, oxidation resistance, wear resistance and mechanical
properties. According to its physical and structural
characteristics, stainless steel sintered porous materials are
mostly used in the fields of noise elimination, filtration and
separation, fluid distribution, flow limiting, capillary core and
so on.
2. Specification of sintered stainless steel porous materials
Material | Filter Rating | Porosity | Penetrability | Working pressure | Operating temperature | Shape | specific surface area |
304,304L,316, 316L Stainless steel powder | 0.5um-70um | 30-45% | 3-1300M³/M²hKPa | 3.0MPa | 600℃ | Round Disc, Sheet,Tube,Round Bar,cap. | 10-40cm²/cm³ |
Production | (Diameter)Length | (Diameter)Width | Thickness | Customized |
Sintered porous round discs | φ5-φ300mm | φ5-φ300mm | 0.5-10mm | Yes |
Sintered porous sheets | 5-300mm | 5-300mm | 0.5-10mm | Yes |
Sintered porous tubes | 100-1200mm | φ20-φ200mm | 1-10mm | Yes |
Sintered porous cartridge | 100-1200mm | φ20-φ200mm | 1-10mm | Yes |
3. Properties of sintered stainless steel tube
- High mechanical strength, good plasticity, can be welded.
- Corrosion resistance, oxidation resistance, can be used in nitric
acid, sulfuric acid, dilute hydrochloric acid (5%), acetic acid,
liquid hydrogen, liquid nitrogen environment.
- Good molding process, according to customer drawings for processing
a molding.
- High filtration precision and good purification effect.
- The pores are uniform, the internal structure is stable, and no
particles fall off.
- Good air permeability, easy to back blow cleaning, can be used
repeatedly online regeneration.
- Wear resistance and impact resistance, good mechanical properties.
- High-temperature resistance, in normal use under 500 ℃.
4. Application of stainless steel sintered porous materials
According to its physical and structural characteristics, stainless
steel sintered porous materials are mostly used in the fields of
noise elimination, filtration and separation, fluid distribution,
flow limiting, capillary core and so on.
- Chemical raw material production process in addition to impurity
filtration, material decarburization filtration and fine
filtration.
- Ozone aeration and gas diffuser/sparger
- Food and beverage industry finished product clarification
filtration.
- Filtration and recovery of precious metal catalyst in petrochemical
industry.
- Precision filtration of liquid raw materials, products and
pharmaceutical intermediates in the chemical industry.
- Reverse osmosis security filtration in the field of water injection
filtration.
- Gas purification of steam, compressed air deoiling purification.
- Medium purification and flow limitation for pneumatic components,
lubricants, fuels and hydraulic pressure systems.
- Chemical dye industry of high - temperature decarburization.
5. Precautions for the use of sintered stainless steel tube
- During installation, disassembly and clean avoid scratches,
collisions and falls on hard objects.
- When using, the filtrate is filtered from the outside in to avoid
the reverse direction.
- Avoid instant pressurization when the filter element works.
- When the filtration efficiency is less than 50%, the filter element
should be cleaned in time.
- When cleaning the filter element, first backblow with pure gas,
backblow pressure is 1.5 times of the working pressure, each time
for 3-5 seconds, and 4-6 times, then backwash with clean liquid for
3-5 minutes, repeat 2-3 times.
- If the filter element is not good after online backblowing and
backwashing, it should be removed and cleaned in time.
6. Method for cleaning stainless steel sintered filter tube
- The decarbonization filter elements in the pharmaceutical and
chemical industries are mainly back blown and backwashed, and the
ultrasonic cleaning is the best.
- The filter elements of water industry are mainly rinsed with 5%
concentration of nitric acid.
- According to the chemical properties of the filtered impurities,
the filter elements of the original liquid shall be respectively
soaked in pickling (5% nitric acid) or alkaline washing (3-5%
sodium hydroxide) and then washed with ultrasonic cleaning.
7. Main products list