Guangzhou Sino International Trade Co.,Ltd |
Verified Suppliers
|
|
Digital Readout Display With Linear Glass Scale For SDS2MS High Precision In Two Axis By SINO
verview of SDS 2MS Dual Axis Digital DRO and KA Grating Ruler
1. Dual axis DRO: With this kit, you can concurrently operate and
view the movement of the machine along two axes, such as the X and
Y axes in a milling machine. This enables you to assess the
equipment's operational status and ascertain whether the machine
tool has reached the user's desired position.
2. Magnetic ruler encoder system: Using magnetic technology, the KA
linear ruler encoder system. Dynamic readings that are quite
accurate can be acquired by working together with the DRO display
unit and the magnetic glass scale that is mounted on the machine
shaft. This reading has the ability to promptly reflect the
equipment's position. Operators that receive fast input are better
equipped to assess whether the machine tool's movement is producing
the desired effects and respond accordingly.
3. Wide voltage range: The ideal voltage range for the SDS 2MS DRO
kit is between 100 and 240 volts AC. Any gadget has an appropriate
operating voltage, and only when the required voltage is reached
can the device function effectively, helping users accurately
measure at specific places.
4. User pleasant interface: The DRO display unit includes an
easy-to-use interface consisting of buttons and a digital display
screen. Users can use different function buttons to switch between
different measurement data to cope with complex working conditions.
Capabilities possessed:
1. Radius/diameter conversion.
2. MM/Inch conversion.
3. Absolute/relative conversion.
4. Mid-splitting function.
5. Easy "R" function.
6. Smooth "R" function.
7. PCD hole positioning on circumference.
8. 200 groups zero position memory.
Detailed parameters of DRO SDS2MS digital readout system:
1. Voltage range: AC 85 v ~ 250 v / 50 hz ~ 60 hz
2. 15w power consumption: 25 va
3. Coordinate the number: a coordinates, two coordinates
4. Show that signed seven display (two or three axis) output data information using eight meters words show symbols
5. Net Weight: 1.3kg/2.9lb
6. The input signal: TTL, EIA - 422 open collector output signal, convenient interface with a programmable controller.
7. Allow the input signal frequency: > 100 KHZ
8. To connect a resolution: 10 microns, 5 microns, 2 microns, 1 mu m, 0.5 microns
1 PC | 2 Axis digital readout SDS2MS |
1 PC | Transparent cover |
1 PC | Instruction Manual (English) |
1 PC | Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.