Xinxiang Magicart Cranes Co., LTD |
Verified Suppliers
|
|
Marine Traveling Lift ,Boat Hoist ,Yacht crane, Marine crane
Product Description
A portable boat lift is a tool designed specifically to allow one person to transport, set up, and safely separate boats from boat trailers. Portable boat lifts are intended to be used on land, rather than near, in, or on the water. Sometimes referred to as a boat hoist, this equipment holds the waterfcraft out of the water so that maintenance and repairs can be performed.
A portable boat lift is different from a gantry crane, fork lift with elongated forks, or machine, none of which can be easily transported from location to location. A portable boat lift is not a boat lift which is commonly found attached to a dock. Although some devices allow one person to separate a boat from a trailer or lift a boat up and out of the water, they are not by definition portable.
The term "boat lift" originally referred to lift locks. In modern usage the term "boat lift," as opposed to "portable boat lift," usually refers to devices permanently installed at a dock to simply lift a boat above the water, a type of ship lift. It is not specifically designed for separating a boat from a trailer.
Portable boat lifts may differ in design, cost, weight, and function but they are by definition portable.
Prior to the introduction of portable boat lifts, boat lifting work could only be performed at shops or locations that had access to cranes, machines, forklifts, or similar lifting equipment. Portable lifts allow individuals, professional boat and boat trailer mechanics, boat and boat trailer painters or anyone needing to separate a boat from a trailer the ability to perform the work by themselves away from a shop.
Portable boat lifts are relatively new to the boating industry.
Drawing and Specification
Model | Capacity | Clear Height | Clear Width |
DB 10 | 10T | 2m~9m | 3m~12m |
DB 20 | 20T | 2m~9m | 3m~12m |
DB 30 | 30T | 2m~9m | 3m~12m |
DB 50 | 50T | 2m~9m | 3m~15m |
DB 70 | 70T | 2.5m~12m | 3m~15m |
DB100 | 100T | 2.5m~12m | 3m~15m |
DB150 | 150T | 3m~15m | 3m~18m |
DB200 | 200T | 3m~15m | 3m~18m |
DB250 | 250T | 3m~15m | 3m~18m |
DB300 | 300T | 5m~20m | 5m~25m |
DB400 | 400T | 5m~20m | 5m~25m |
Customized | Customized | Customized |
Main Features
Environmental Conditions
1. The power source is three-phase alternating current,rated
frequency is 50HZ,rated voltage is 380V.
2. The working environment temperature ranges from -20℃ to +45℃ and
the relative humidity is no lower than 95%(with dew).
3. In-service, the wind speed should be no higher than 20m/s;
out-of-service, the wind speed should be no higher than 44m/s.
4. The working class is A6-A7.
5. The gradient of crane traveling floor should be less than 1% and
part of that should be no more than 3%.
6. The crane which has the special requirement for working
conditions, can be manufactured following the contracts.
Package and Delivery
Typical Project
Installation and Commissioning
Product Certificate
1.Is your product customized?
Thanks for your question. Yes, because the working condition are
different, all our products are customized depending on detail
requirement! So if you give us more information about the lift
capacity, span, lift height, power source and other specials, we
will give you a very quick and accurate quotation.
2. What’s the information should I provide when inquiry?
Thanks for your question. The more information you provide, the
accurate solution we can prepare for you! The information such as
the lift capacity, span, lift height, power source or other
specials you give us will be more appreciated.
3. How many operating methods for my selection?
Thanks for your question. The standard operating methods we provide
is pendent controller with push buttons. Meanwhile, we can also
provide the remote control with push buttons and the cabin (space
capsule seat) control with joystick. You can choose any of them,
just tell us!
4. What’s the max lifting capacity of the crane?
Thanks for your question. The max Lifting capacity of our standard
crane are up to 450 ton. If this can’t satisfy your working
requirement. Please contact us for special customized.
5. The space of my workshop is limited, can the crane ok for mine?
Thanks for your question. For low headroom workshop, we have the
Special products. The detail dimension please consult our
professional engineer.
6. Can the crane work in hazardous environment?
Thanks for your question. This type product is just for application
in general manufacturing workshop. For hazardous environment,
please consult our professional sales manager.
7.Do your side can provide lift tools?
Thanks for your question. Yes, we can provide any kinds of lift
tools such as lift sling belt, lift clamp, grab, magnet or other
specials as your requirement's.