Active Member
|
[China]
Address: No.133,Bldg.12, Zhong Hai Xi An Hua Fu, Shajiang Road, Songgang Street, Bao An district, Shenzhen
Contact name:Liu
Shenzhen Silvercnc Tech Co., Ltd. |
|
|
Customer Supply Encoder available 5 axis direct driver DD Rotary Table 180mm
Product description
Direct Drive Rotary Table are directly driven from the motor (High Torque Motors). Direct drive rotary table has no worm gear and hence zero backlashes. These tables are used in applications which require high acceleration/deceleration, eg. Blade machining. Also on high-speed drill tap centres where indexing time is very crucial
Main Features
1. Driven by torque motoe,working in high speed and rapidresponse cases,can save a lot of time.
2. Assembling with the world famous brands' bearings, it is of good rigidity, large load capacity and small runout. Working with standard encoder(26 bit) which can locate quickly.
3. With our own patented brake system, we can ensure the good quality of products.
4. Adopting with the IP66 protection, it can prevent water from the rotary.
5. The special rotary can be made according to clients' requirements for different working environment and precision.
Main technical parameter
Rotary Table Model | DZDA-180 | |
| axis | cxis | |
Disk surface diameter(mm) | Φ180 | |
| Center for high(mm) | 238 | |
Center hole diameter(mm) | Φ40 | |
| Clamping Way | Air | Air |
Clamping Torque | ≥300 | ≥100 |
Disk Surface/radial Runou(mm) | 0.005/0.015 | |
driving Type | Torque motor direct drive | |
Voltage for Driver(V) | 220 | 140 |
Rated/Maximum Speed | 200/500 | 150/200 |
| Rated/Maximum Torque | 105/210 | 51/102 |
| Rated/Maximum Current | 8.7/17 | 3.4/10 |
| Positioning Precision | ±10 | |
| Repeated Positioning Precision | ±2 | |
Minimum unit | 0.001 | |
Load Capacity(Kg) | 50 | |
| Weight(Kg) | ≈193 | |
Level of Protection | IP66 | |
Product dimession
