Home Companies MINGCHENG GROUP LIMITED

160 Gray General Purpose Electronic Potting Silicone Compound

MINGCHENG GROUP LIMITED

Contact Us

[China] country

Trade Verify

Address: No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China

Contact name:Amy Tse

Inquir Now

MINGCHENG GROUP LIMITED

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

160 Gray General Purpose Electronic Potting Silicone Compound

Country/Region china
City & Province dongguan guangdong
Categories Recycled Rubber
InquireNow

Product Details

160 Gray General Purpose Electronic Potting Silicone Compound

 

Description of Electronic Potting Silicone Compound& Encapsulates

RTV160 is a two-component room temperature cure potting compound with mix ratio of 1:1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It’s suitable for encapsulating of LED displayers, power module and electronics components, etc.

 

Features of Electronic Potting Silicone Compound& Encapsulates

Easy mix with 1:1 proportion

Low viscosity, good flow ability

Room temperature cure or heat up cure

Thermal conduction, flame resistance

Without solvent

 

Application of  Electronic Potting Silicone Compound& Encapsulates

 

 

Using Instructions of Electronic Potting Silicone Compound& Encapsulates

 

1. Preparing: clean up the coating surface, remove the rust, dust, oil dirt.

 

2. Pouring: weigh the silicone and catalyst correctly, mix silicone part A and part B thoroughly, pour onto the electronic components/surface after vacuum degassing.

 

3. Curing: room temperature cure or heat-up cure is both workable.

 

It should be use up after open the package, the material must be kept in a cool place sealed well, and it should avoid from contactwithmoisture in the air.

 

Technical datasheet of Electronic Potting Silicone Compound& Encapsulates

Item No.:RTV160A/B
Appearance(A/B)A: Grey liquid B:White liquid
Viscosity(A/B,Mpa.s)3600~3800
Mix ratio (A/B)1:1
Pot life after curing(25℃,min)30-40
Curing time (hrs)2-4
Thermal conductivity(W/m·K)(A/B)≥0.60
Durometer Hardness(JIS A0)56~57
Volume resistivity(Ω·cm)7X1014
Dielectric breakdown voltage(KV/mm)18~20
Flammability classificationUL-94 V-0
Shrinkage %0.01

Note: Mechanical and electrical performance data tested at 25°C 7 days after curing, relative humidity of 55%; all the tested data is average value.

 

Packaging of Electronic Potting Silicone Compound& Encapsulates

Packs are available in 20kg and 200kg per drum.

 

Storage & Transportation of Electronic Potting Silicone Compound& Encapsulates

Keep it from strong sunshine, heat, and store in cool & dry place, well sealed. silicone rubber has a shelf life of 12 months.

It can be transported as non-dangerous goods.

 

Hot Products

RTV-2 Liquid Silicone Rubber For Making Mold For Resin Statue Sculpture Item No. Character before ...
RTV-2 Mold Liquid Silicone Rubber For Making Mold Item No. Character before curing Curing Part A ...
White Tin Cure RTV-2 Silicone Liquid Rubber Plaster,Resin Moulds Casting 3481 Silicone Description ...
Resin Arts & Crafts Mold Making RTV2 Liquid Silicone Rubber Product Description RTV-2 silicone ...
Condensation Curing High Strength Mold Making Liquid RTV-2 Silicone Rubber Product Description ...
Garden Decoration Mould Making RTV-2 Silicone Rubber Product Description RTV-2 silicone rubber is ...