|
[China]
Trade Verify
Address: No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China
Contact name:Amy Tse
MINGCHENG GROUP LIMITED |
|
Verified Suppliers
|
|
|
High Duplicating Pourable RTV-2 Silicone Liquid Rubber For Urethane Faux Wood Beams Castings
Product Description
Silicone liquid rubber is called Tin cure silicone rubber which is
also called condensation-cure silicone mold rubber, these are
high-tear silicone mold rubbers that are known as the “work horse”
of the industry because of their performance and
economy.
Two-component silicone rubbers are used for the realization of flexible matrices, they are liquid and fliud suitable to be applied by casting (pouring the liquid silicone rubbers on the model).
Application of RTV-2 silicone liquid rubber
mainly used for the reproduction of hand-made articles, from silicone rubber matrices: resins (Unsaturated polyester resins, epoxy resins, polyurethane resins and acrylic resins), Polyurethane elastomers, Natural waxes and synthetic, Plasters and cements, Low-melting point alloy and Wood imitation (PU resin).
Features of RTV-2 silicone liquid rubber
1- Liquid silicone rubber for molding has an exceptional fluidity
and good operability.
2- Liquid silicone rubber for molding has good Temperature and
deformation resistance as well as low shrinkage.
3- Liquid silicone rubber for molding has High duplication times.
Technical datasheet
| Item | MCSIL-H25 |
| Color | white |
| Mixing ratio | 100:2 |
| Mixed viscosity | 22000 cps |
| Working time | 30-40 mins |
| Curing time | 4-6 Hours |
| Hardness | 25 Shore A |
| Tear Strength | 30N/mm |
| Tensile Strength | 4 Mpa |
| Shrinkage | ≤0.2% |
| Elongation at break | 520% |
Instruction of RTV-2 silicone liquid rubber:
How to use the silicone rubber to make a mold
Step 1: Prepare and clean the master piece. Please make sure your
original moulds clean and dry.
Step 2: Mixing part A and part B evenly. Take 100g of part A and
add 2g of part B and mix the silicone rubber and curing agent
evenly.
Step 3: Vacuum degassing, this step takes less than 10 minutes.
Otherwise, it will cause a cross-linking reaction, and no further
steps will be available.
Step 4: Pouring or brushing. After released the bubble, we can
pour/brush the silicone rubber on the master piece.
Package of RTV-2 Silicone Liquid Rubber
Part A base silicone: 20kg,25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 800g/bottle, 1kg/bottle
Storage and Precautions of silicone liquid rubber:
RTV-2 silicone rubber for making art crafts, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Benefits of MC Silicone
Ease of processing
High resin resistance increasing the number of cast parts
Low linear shrinkage for greater accuracy
Easy release of shapes, including large pieces and complex
geometries
High compatibility with water-rich casting materials such as gypsum
Increased compatibility with high performance concrete
Dimensional stability due to very low shrinkage
High mechanical properties over a range of flexibility
