Home Companies MINGCHENG GROUP LIMITED

Yellow Resistance Two Part Crystal Clear Epoxy Resin For Wood Casting 3506912000

MINGCHENG GROUP LIMITED

Contact Us

[China] country

Trade Verify

Address: No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China

Contact name:Amy Tse

Inquir Now

MINGCHENG GROUP LIMITED

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Yellow Resistance Two Part Crystal Clear Epoxy Resin For Wood Casting 3506912000

Country/Region china
City & Province dongguan guangdong
Categories Adhesives & Sealants
InquireNow

Product Details

Yellow Resistance Two-Part Crystal Clear Epoxy Resin For Wood River Table Casting

 

Product description

Clear epoxy resin is a low-viscosity resin, which consists of two components: the actual resin and the matching hardener. When these two components are mixed, a chemical reaction occurs, which cures under normal and low temperature conditions. It has good leveling, natural defoaming, low viscosity, high hardness and high strength. It can be cured at room temperature or by heating. Dedicated to crystal drop board, marble board, 3D floor insulation, metal floor, kitchen countertop, resin coating, high hardness coating on any surface; and other electronic parts, moisture-proof potting, secret masking, etc.

 

Advantages
High water clear appearance
High hardness
High gloss
Easy application
Easy to clean

 

Main Applications

Tabletop, Countertop
Rhinestone beads
Man made diamond
Man made jewelry
Souvenir

Operation
1. Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2. Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 oC, please heat A glue to 30 oC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3. When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.

Lab Equipment

 

Caution
1,  The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2,  Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3,  If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4,  Keep away from children.
5,  Please take a trial before application to avoid usage mistake.

Storage And Shelf Life
1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.

Hot Products

RTV2 Liquid Silicone Mold Rubber Addition Cure Silicone Ultra Soft Ratio 1:1 Item No. MCPLA-L00A/B ...
Soft RTV2 Platinum Cure Liquid Silicone Rubber Molds Casting 10 Shore A Item No. MCPLA-L10A/B Color ...
Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds Product description Two...
Translucent RTV2 Platinum Cure Silicone For Making Cholocate Cake Decorating Molds​ Product ...
Item no. MCSIL-2025 Color white Viscosity 22000 cps Mix ratio 100:2 Pot life 30-40 mins Curing time ...
RTV-2 Liquid Silicone Rubber For Making Mold For Resin Statue Sculpture DESCRIPATION Silicone rubber ...