Home Companies MINGCHENG GROUP LIMITED

35 Shore A Fast Set Two-Part Silicone Mold Putty For Making Pads For Horse Hoof Better Care

MINGCHENG GROUP LIMITED

Contact Us

[China] country

Trade Verify

Address: No.2, Zhouliao Road, Langzhou Industrial Zone, Changping, Dongguan, Guangdong, China

Contact name:Amy Tse

Inquir Now

MINGCHENG GROUP LIMITED

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

35 Shore A Fast Set Two-Part Silicone Mold Putty For Making Pads For Horse Hoof Better Care

Country/Region china
City & Province dongguan guangdong
Categories Nitrile Rubber
InquireNow

Product Details

Fast Set Two-Part Silicone Silicone Mold Putty For Making Pads For Horse Hoof Better Care

 

Product Description

Silicone putty is formulated specifically for industrial applications where shock absorption and support are necessary. Two formulations are available: Firm support and super-cushion. These two-component systems are activated by mixing equal parts together until a uniform color is achieved at which point the hoof is packed and a full pad is applied. The full weight of the horse is applied for a custom fit and excess material is trimmed away. Benefits include: orthopedic support for the coffin bone; increased blood circulation; conforms to hoof with the movement of the horse; does not shrink and remains resilient throughout the life of application.

 

Silicone putty is measured 1:1 by volume (no scale necessary) and mixed together fast by hand kneading. The mixed putty is then placed in the bottom of the horse hoof after it has been cleaned and prepared.

The material needs to be fast curing, safe for the horse, and reliably sturdy and strong.

Hoof putty, ideal for filling old nail holes. Easy to apply and shape for a clean result. Protects the old nail hole against penetration of moisture and debris.

 

Physical Properties:

Before CuringCatalyst ComponentsBase Components
AppearanceWhite puttyBlue putty
Mix ratio1:1
Pot life2-3minutes
Curing time(37C)<20 minutes
After Curing
Hardness(Shore A)35
Permanent deformation %<0.2%
Dimensional stability %<0.25
Copy details(μm)<1.5
Tearing Strength Mpa4.0
Temperature stability60°C for 1 week
Elongation%350

 

Usage Instruction

1. Under the room temperature, take the same amount of base component (blue) and catalyst component (white).

2. Mix the two components together. It is recommended to use the blue spoon to take the base component and white spoon to take catalyst component.

 

3. Use your fingertips to mix the two components together and knead for at least 30 seconds until they are mixed completely.

4. Close the lid immediately 

after usage, the cover can not be interchanged.

 

Package

500g, 1kg, 5kg, 10kg, 25kg

 

Why choose MC silicone putty?

Skin-safe
Non-toxic - contains no nasties
Fast Cure - sets within 30 minutes
Easy - you don't even need to weigh it... just take out two equal looking amounts of putty from the tubs
No mould box needed - this putty can be used on vertical surfaces, 3d items and even on your toes (if that's your kind of thing)
Vegan-friendly & cruelty-free

 

Precautions

1. Do not use natural rubber gloves. It is recommended to use disposable polyethylene plastic gloves.

2. The product contains platinum catalyst, sulfur, phosphorus, amine, etc. will slow down or even stop the curing reaction, and thus it must avoid sulfur, phosphorus, amine, acrylic and meth acrylic acid esters and other chemical products in use.

3. Close the lid tightly and immediately after use, keep it in cool place, and be refrigerated in summer.

4. The temperature has a significant impact on the curing time; the curing reaction will slow down at low temperature, and speed up at high temperature curing speed. It should adjust operation rhythm according to the environment and the finger temperature.

5. It is strictly recommended to use the same amount of base and catalyst. Unequal amount will lead to delayed or accelerated cure.

Hot Products

RTV2 Liquid Silicone Mold Rubber Addition Cure Silicone Ultra Soft Ratio 1:1 Item No. MCPLA-L00A/B ...
Soft RTV2 Platinum Cure Liquid Silicone Rubber Molds Casting 10 Shore A Item No. MCPLA-L10A/B Color ...
Two Parts RTV2 Liquid Platinum Silicone Rubber for Candy Fondant Molds Product description Two...
Translucent RTV2 Platinum Cure Silicone For Making Cholocate Cake Decorating Molds​ Product ...
Item no. MCSIL-2025 Color white Viscosity 22000 cps Mix ratio 100:2 Pot life 30-40 mins Curing time ...
RTV-2 Liquid Silicone Rubber For Making Mold For Resin Statue Sculpture DESCRIPATION Silicone rubber ...