Active Member
|
[China]
Address: Room 412, No.7, Zhongxin Road, Caier Industrial Zone, Donghuan Street, Shiqiao, Panyu District, Guangzhou City, Guangdong Province, China
Contact name:Tony
Guangzhou ZOSN Electrical Automation Co., LTD |
|
|
Automatic Sleeve Shrink Wrpping Sealing Machine For Gas Lighter
Product Feature
The machine can change the packing forms according to the production requirements, such as two rows, three rows, or four rows without tray. When replacing packaging, you just convert the switch on the panel and replace the supporting material block.
Can work independently, but also with the production line docking automatic feeding, wrapping film, sealing and cutting, shrinkage, cooling, shaping, unmanned flow work.
Smooth film transport, fast speed, simple structure, simple operation, more smooth film pulling, using a variety of film rolling materials.
Safety emergency stop switch: when there is a problem with heavy operation of the machine, twist the emergency switch and the machine will stop running immediately.
Machinery accessories universal: universal accessories, easy to replace, to solve your worries.
According to different shapes and specifications of products, the positioning frame of the front section can be adjusted arbitrarily.
Using two high-power fan motor, stable start, strong power, is better wind in the dry tunnel to form power source.
Imported coating alloy knife: sealing knife part with Teflon coating, high temperature resistance, no cracking, no smoke, zero pollution, sealing frame with high quality alloy steel, frame is not easy to deformation.
Jet temperature PE heat shrinkable machine: adopting frequency converter speed control, can adjust the speed, the promise to ensure smooth delivery and good shrinkage effect, use copper wire motor, low noise, long service life, use does not show just hair heat pipe, heat evenly, durable, energy save electricity, the tail has a cooling system, make the packaging film fast cooling, strengthened toughness, with no deformation.
ZS-8040M Side Feeding Sleeve shrink packaging machine
| Model | ZS-8040M |
| Power Supply | AC 380V 3PH 50/60Hz |
| Power | 2.2KW |
| Max. Packing Size | (L)≤600mm;(L)≤650mm;(H)≤350mm |
| Sealing Size | (W)800mm |
| Table Height | 830mm |
| Packing Speed | 10-15pcs/min |
| Air Source | 6kgf/cm2 |
| Shrink Film | PE |
| Sealing Type | Sleeve type |
| Machine Size | L2500×W2260×H2030mm |
| Package Size | L2560×W2320×H2100mm |
| G./N. Weight | 520/460kg |
ZS-8060PE Shrink Tunnel
| Model | ZS-8060PE |
| Power Supply | 220V/380V/ 3PH 50-60 Hz |
| Power | 28KW |
| Table Height | 800+50mm |
| Conveying Load | 80KG |
| Conveyor Speed | 30m/min |
| Tunnel Size (L×W×H) | 1800×800×600mm |
| Machine Dimensions (L×W×H) | 1500×600×500mm |
| G./N. Weight | 710/650Kg |
Product Display
Standard safety performance
1. The transverse sealing knife is equipped with automatic anti-wrong cutting product device
2. There are protective devices or warning signs at unsafe locations of the machine.
3. The machine is equipped with emergency stop control device, it can stop working and restore all the organs to the initial state after pressing the emergency stop switch.
4. The machine is equipped with safety cover
Packaging And Delivery
1. Spray anti-rust oil
2. Fix the machine on the pallet
3. The machine is also wrapped with stretch film and sponge pads,
prevent the machine from impact, moisture, dust
4. Covered with sea export plywood case.
5. Port Guangzhou or Shenzhen
