|
Trade Verify
Address: Add.: NO. 101, TIANYUAN AVENUE, DONGXIHU DISTRICT, WUHAN CITY, HUBEI PROVINCE, CHINA
Contact name:Alice
Hubei HYF Packaging Co., Ltd. |
|
Verified Suppliers
|
|
|
Soft Transparency Blow PET Heat Shrink Film For Printing And Packing
Production Details
PET Heat Shrink film with excellent shrinking characteristics. It is applicable in various shrinkable packaging, such as outer wrapping for PET and glass bottles, cans and other kinds of containers.Especially good for full body wrappings, labels and cap seals where high shrinkage is required.
Technical Datas
| No | Test Item | UNIT | Standard | Test Result | Decide | |||
| 1 | (Average thickness deviation) | μm | ±3 | 0 | Qualified | |||
| 2 | TENSILE STRENGTH | (MD) | MPa | ≥42 | 65.8 | Qualified | ||
| (TD) | MPa | ≥142 | 231 | |||||
| 3 | ELONGATION | (MD) | % | ≥300 | 591 | Qualified | ||
| (TD) | % | ≥35 | 55 | |||||
| 4 | (Elasticity Modulus) | (MD) | MPa | ≥1500 | 3269 | Qualified | ||
| (TD) | MPa | ≥3000 | 7370 | |||||
| 5 | HEAT SHRINKAGE | (MD) | % | ≤5.0 | 2.3 | Qualified | ||
| (TD) | % | 60～70 | 66 | |||||
| 6 | (HAZE) | % | ≤7.0 | 2.2 | Qualified | |||
| 7 | C.O.F | (IN/OUT) | dynamic friction coefficient | / | ≤0.50 | 0.47 | Qualified | |
| 8 | WETTING TENSION | mN/m | ≥38 | ≥38 | Qualified | |||
| 9 | Density | g/cm3 | 1.32±0.3 | 1.46 | Qualified | |||
Advantages
1. Excellent processability during printing & shrinking (smooth flat seams)
2. No de-lamination
3. High-impact strength
4. Gloss/gloss surface finish
5. Clear, transparent film
6. Attractive total system cost due to high-speed labeling, low scrap rate, quick changeover, and wide-web printing.
Application
1. Beverage bottle packaging.
2. Snack/Nuts bottle packaging.
3. Shaped bottle packaging.
4. Motor / Car oil bottle packaging.
5. Battery products packaging.
Storage
1. The temperature for storing should be below 30 so that It can avoid damage. And Avoid direct sunlight.
2. The shelf life is for 6 months. Please use up within the time.
Payment
30% deposit by T/T or L/C paid before the production, and the balance should be paid off before the shipment.
FAQ:
1. Q: What is your Payment?
A: T/T or L/C. And 30 deposit paid before production, 70%
balance before shipment.
2. Q: What is our delivery time?
A: Samples need 3~7 days prepared, and mass production need 15~25 days.
3. Q: Where is loading port?
A: FOB,Shanghai.
4. Q: What information should I let you know if I want to get a
quotation?
A: - Size of the products (Length x Width x Height)
- Usage
- Material
- Printing colors
- Quantity
If it is possible, please also provide pictures or design sketch for checking.
.
