|
Trade Verify
Address: Add.: NO. 101, TIANYUAN AVENUE, DONGXIHU DISTRICT, WUHAN CITY, HUBEI PROVINCE, CHINA
Contact name:Alice
Hubei HYF Packaging Co., Ltd. |
|
Verified Suppliers
|
|
|
40mic High Shrinkage Transparent PETG Heat Shrinkable Films For Cone Sleeve
1. Description
PETG (polyethylene terephtalate glycol) is a film with a high strength ratio and excellent clarity. While PET is the most heat resistant shrink sleeve material, it is the most scuff resistant, has an higher gloss, and also has an high shrink percentage. Additionally, it can be recycled.
2. Technical Data Sheet
| No | Test Item | UNIT | Standard | Test Result | Decide | |||
| 1 | (Average thickness deviation) | μm | ±3 | 0 | Qualified | |||
| 2 | TENSILE STRENGTH | (MD) | MPa | ≥42 | 65.8 | Qualified | ||
| (TD) | MPa | ≥142 | 231 | |||||
| 3 | ELONGATION | (MD) | % | ≥300 | 591 | Qualified | ||
| (TD) | % | ≥35 | 55 | |||||
| 4 | (Elasticity Modulus) | (MD) | MPa | ≥1500 | 3269 | Qualified | ||
| (TD) | MPa | ≥3000 | 7370 | |||||
| 5 | HEAT SHRINKAGE | (MD) | % | ≤5.0 | 2.3 | Qualified | ||
| (TD) | % | 60～78 | 78 | |||||
| 6 | (HAZE) | % | ≤7.0 | 2.2 | Qualified | |||
| 7 | C.O.F | (IN/OUT) | dynamic friction coefficient | / | ≤0.50 | 0.47 | Qualified | |
| 8 | WETTING TENSION | mN/m | ≥38 | ≥38 | Qualified | |||
| 9 | Density | g/cm3 | 1.32±0.3 | 1.46 | Qualified | |||
3. Why to choose our PETg shrink film?
1) "Slow shrink" behaviour
2) Very high shrinkage ratio (78%)
3) Excellent processing properties
4) Eco-compatible
5) Excellent transparency
4. Advantages
PETG is an amorphous plastic resign of the polyster family.Due to its high shrinkage,highest among all shrink sleeve material, PETG is an ideal solution for container shrink film that have complex geometries and require superior printability.Compared to other material, PETG resign is much more environmentally friendly making it a perfect solution for companies looking to switch from more harmful materials.
5. Storage
1) Store our PET(G) shrink films below 30℃ in its original packaging;
2) Avoid damages from direct sunlight, high moistyre and falling down.
3) Shelf life: 6 months.
6. FAQ
Q: 1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Mixed samples are acceptable.
Q: 2. What is the lead time?
A: Sample needs 2-3 days prepared; mass production time needs 15-25 days normally.
Q: 3. Do you have any MOQ limit?
A: Our MOQ is 1Tons;
Sea Port: FOB Shanghai
Q: 4. How do you ship the goods and how long does it take arrive?
A: We usually ship by LCL or FCL by sea or air shipment.
The delivery time according to your quantity.
Q: 5.What information should I let you know if I want to get a quotation?
A: The external size of your products(Thick x Width x Length)
The quantity.
