Normal temp. is +25ºC Cold Resistance Environmental Test Chamber
For Leather / Rubber GW - 033E
•Brief Introduction:
This machine test cold-endurance of rubber, plastic, shoe,
synthetic leather…etc. It is helpful for analyzing both materials
and products properties in the cold environment.
The test chamber can be equipped with a variety of flexing/bending
grips which are made by stainless steel. There are the following
models to dynamically test the specimens in cold environment.
The system employees electrical LCD counter whose capacity is form
0~999999.
•Technical Specifications:
Model | GW-033E Freezing testing machine |
Temperature range: | -30ºC(-40ºC/-60ºC/-80ºC can choose) |
Inner size:; | 500mm(W)×600mm(D)×500mm(H) |
Interior/Exterior material: | Stainless steel plate(SUS#304) |
Cooling Accuracy: | ±0.3ºC |
Temperature Uniformity: | ±1ºC |
Temperature. accuracy: | ≤±1.5ºC |
Cooling down speed: | -60ºC within 80 minutes |
Note: | Normal temp. is +25ºC |
Counter: | LCD 0~999,999 |
Dimension(W*D*H): | 175*72*86CM |
Weight: | 320KG(not including the grips weight) |
Power: | AC220V |
•Standard for:
ASTM-D1709,D1593,1052,JIS-K6545,HB-T2877,CNS-7705
•Attached accessories:
A:BALLY flexing resistance fixture
1.Bending angle:22.5°
2.testing pieces:4
3.Bending speed:100±3cpm or60cpm(can been choose)
B,Whole sole ROSS flexing fixture
1.Bending angle:90°
2.testing pieces:2
3.Bending speed:100cpm
4.Size:150×25mm
C,Whole shoes flexing fixture
1.Bending angle:0-50° adjustable
2.testing pieces:2
3.Test speed:0~150cpm adjustable
4.Size:150×48mm