IOS9001 Post Roll Forming Machine With Hydraulic Cut

Steel Structure Automatic Wire Mesh Fence Post Roll Forming Machine With Hydraulic Cut

The peach-shaped column fence is a new type of product, mainly popular in the United States, Japan, Korea and other developed countries It has the characteristics of being aesthetically pleasing, free from topographical constraints and easy to install. (fence post roll forming machine/ highway guardrail bending machine)

High quality processing: galvanised steel with high adhesion spraying treatment on the surface.

Safety: the mesh is embedded in pre-designed grooves at any height of the posts and is an integral part of the fencing program that cannot be dismantled. (Wire Mesh Fence Post roll forming machine/Wire Mesh Fence Post bending machine)

Easy to install: quick push installation, no accessories required for all types. (Peach post roll forming machine/Peach post guardrail bending machine)

Installation is different from other fences. Such as wave type fence, sports court fence, railway fence, highway protection fence, etc. are first installed column column and then connect the mesh. And peach-shaped column fence installation can not be so installed. If you press the column first, the mesh is not hooked up. (1) It is wrong to use iron pliers to pull open the connection slot. This will damage the surface protection layer of the fence. Affect the service life. (2) There are also some forced to hang the net is also wrong. This will deform and loosen the net. (3) The spacing is enlarged even more. This makes the net surface loose and easy to lose. It will not work as protection. The above is the wrong way to install the net. The correct installation method is: first fix the first column and then hook the mesh to the column, followed by the second column. The second post is then fixed. Then attach the second mesh, and the third post. Tighten the netting and fix the third column. And so on, in one set. This way the netting can be installed firmly without damaging the surface.

Flow Chart of Steel Structure Automatic Wire Mesh Fence Post Roll Forming Machine With Hydraulic Cut

5T hydraulic decoiler-Punch press-Roll forming machine-Hydraulic cut-Outer table

Main Technical Parameters

Pictures of Steel Structure Automatic Wire Mesh Fence Post Roll Forming Machine With Hydraulic Cut