Active Member
|
[China]
Address: Wuzhouyinhecheng,Wuxi,Jiangsu,China
Contact name:Helen
Jiangsu Hai Yi Da Metal Products Co., Ltd |
|
|
Red Copper Sheets/Foil/ Coil/ Stripe/Board Paper Copper Plate of Tu2 T2 Tp2 Tp1 C1011 C10100 C10300 C11000 C12200 C1201
| Product Name | Copper plate/Sheet |
| Thickness | 0.1mm-120mm |
| Material | T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920, TP1,TP2,C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300, TU1,TU2,C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200, C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000,C44300, C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70600,C70620,C71000, C71500,C71520,C71640,C72200,etc |
| Hardness | 1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
| Surface | mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required |
| Export to | Singapore,Indonesia,Ukraine,Korea,Thailand,Viet Nam,Saudi
Arabia,Brazil,Spain,Canada, USA,Egypt,India,Kuwait,Dubai,Oman,Kuwait,Peru,Mexico,Iraq,Russia,Malaysia,etc |
| Application | 1. Pancake Coil for ACR, General Engineering Applications 2. LWC Coil for ACR, General Engineering Applications 3. Straight Copper Tubes for ACR and Refrigeration 4. Inner-grooved copper tube for ACR and Refrigeration 5. Copper Pipe for Transportation System of water, gas and oil 6.PE-coated copper tube for water/gas/oil transportation system 7.Semi-finished Copper tube for industrial applications |
Product Features:
It has good electrical conductivity, thermal conductivity,
corrosion resistance and processing properties, and can be welded
and brazed. It contains less impurities that reduce electrical
conductivity and thermal conductivity, and a small amount of oxygen
has little effect on electrical conductivity, thermal conductivity
and processing properties, but it is easy to cause "hydrogen
disease", and it is not suitable for processing (annealing,
annealing, welding, etc.) and use.
Table 1. chemical composition of Copper Plate/Sheet
| Chemical Requirements | ||||||||||
| CU+AG (%) | SN (%) | ZN (%) | PB (%) | NI (%) | FE (%) | SB (%) | S (%) | AS (%) | BI (%) | O (%) |
| ≥99.90 | ≤0.002 | ≤0.005 | ≤0.005 | ≤0.005 | ≤0.005 | ≤0.002 | ≤0.005 | ≤0.002 | ≤0.001 | ≤0.06 |
| Alloy | Chemical Composition | ||||
| QB | JIS /ASTM | Cu | P | O | Other |
| T2 | JIS C1100 | 99.9 | 0.015-0.040 | - | balance |
| TU | ASTM C10300 | 99.95 | 0.001-0.005 | - | balance |
| TP1 | JIS C1220 | 99.9 | 0.004-0.012 | - | balance |
| Grade(China) | Grade(Japan) | Temper | Vickers Hardness (HV) | Tensile strength(Mpa) | Elongation(%) |
| T2/T3/TP1/TP2 | C11000/C1201 | M | - | ≥290 | ≥40 |
| C1220.etc. | Y4 | 75-125 | 325~410 | ≥35 | |
| Y2 | 85-145 | 340~460 | ≥25 | ||
| Y | 105-175 | 390~530 | ≥13 | ||
| T | - | ≥490 | - |
