|
[China]
Trade Verify
Address: No. 1 Road, Economic developing zone, Botou City, Hebei province, China
Contact name:jack
BOTOU SHITONG COLD ROLL FORMING MACHINERY MANUFACTURING CO.,LTD |
|
Verified Suppliers
|
|
|
customized size rain water color steel cold Gutter Roll Forming Machine
Equipment Detailed Parameters:
| Raw material | |
| material spec | sheet, galvanized steel sheet, aluminum sheet |
| thickness of coil sheet | 0.7-1.2mm |
| Machine details | |
| roller material | High grade NO. 45 forged steel with 0.05mm hard chrome plating |
| shaft material | High grade NO. 45 carbon wrought steel |
| cutting blade | Cr12 mould steel with quenched treatment |
| diameter of shaft | 60 mm |
| forming steps | 18 rows |
| productivity | 15-20 m/min |
| hydraulic station power | 11 KW |
| hydraulic pressure | 10-12MPa |
| controlling system | Delta PLC computer control |
| material of cutting table | Cr 12 mould steel with quenched treatment |
| appearance size | 9500mm*800mm*1300mm |
| hydraulic oil | 40# hydraulic oil |
| Electric tension | 380V 50 Hz 3 Phase or as your requirements |
Components and Technical Specification
| No | Technical Specification | |
| 1 | Manual Uncoiler
| Usage: It is used to support the steel coil and uncoil it in a turntable way. The steel coil is uncoiled by hand. Loading capacity:5T Inner diameter: 500-508mm |
| 2 | Main Roll Forming Machine
| Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped. |
| 3 | Shearing Mechanism
| It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,quenching treatment |
| 4 | Hydraulic System
| Power:4kw,Hydraulic oil: 40# Hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job. |
| 5 | Computer Control Cabinet
| The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The PLC system is easy to operate and use. |
