|
[China]
Trade Verify
Address: Guang Yi Columbus B Tower, Wuxi, Jiangsu, China
Contact name:Vera
JIANGSU LIANZHONG METAL PRODUCTS (GROUP) CO., LTD |
|
Verified Suppliers
|
|
|
Hexagonal Aluminum Profile Tube 6063-T5 95% Pure Cutting Alloy Pipe 5800 Length
The chemical composition of 6063 aluminum alloy becomes the most
important link in the production of high-quality aluminum alloy
construction profiles.
Influence of performance
6063 aluminum alloy is a heat treatable reinforced alloy with
medium strength in AL-Mg-Si system, Mg and Si are the main alloying
elements.
The higher the content of Mg, the greater the number of Mg2Si, the
greater the heat treatment strengthening effect, the higher the
tensile strength of the profile, but the deformation resistance
also increases, the plasticity of the alloy decreases, the
processing performance becomes worse, and the corrosion resistance
becomes worse.
1. The role and influence of 2Si The amount of Si should enable all
the Mg in the alloy to exist in the form of Mg2Si phase to ensure
that the role of Mg is fully played. As the Si content increases,
the grain of the alloy becomes finer, the mobility of the metal
increases, the casting performance becomes better, the heat
treatment strengthening effect increases, the tensile strength of
the profile increases while the plasticity decreases, and the
corrosion resistance becomes worse.
Item | Aluminium pipe/pipes Aluminium Tube/Tubes/tubing |
Material | Aluminium |
Grade | 1000 series: 1050,1060,1070,1080,1100,1435, etc 2000 series: 2011,2014,2017,2024, etc 3000 series: 3002,3003,3104,3204,3030, etc 5000 series: 5005,5025,5040,5056,5083, etc 6000 series: 6101,6003,6061,6063,6020,6201,6262,6082, etc 7000 series: 7003,7005,7050,7075, etc |
standards | ASTM, ASME,EN, JIS, DIN,GB/T etc |
Size | Outer Diameter:3-250mm |
Wall Thickness: 0.3-50mm | |
Length: 10mm -6000mm | |
Surface treatment | Mill finish Anodized Electrophoresis Powder coating Wooden grain Sand blast |
Surface colors | Nature, silver, bronze, champagne, black, gloden, etc As customized |
Temper | T3-T8 |
Moulding/Pattern | 1. Using our moulds, no fee 2. Using customer drawing, opening mould, usually about 5 tons the moulding fee is free. 3. Can be diguessed. |
Application | 1. Lighting,solar reflector plate. 2.architectural appearance, interior decoration:ceiling,metope, furniture,cabinets and so on. 3.elevator,nameplate, bags. 4.automotive interior and exterior decoration. 5. Interior decoration: such as photo frame. 6.household appliances, refrigerator, microwave oven, audio equipment. 7. Aerospace and military aspects. 8, machinery parts processing, mold manufacturing . 9. chemical/insulation pipeline coating. |
Chemical Composition
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr |
Impurity | Al | 2014 | 0.5-1.2 | 0.7 | 3.9-5.0 | 0.4-1.2 | 0.2-0.8 | 0.1 | 0.25 |
0.15 | - | 0.15 | Rest | 2017 | 0.2-0.8 | 0.7 | 3.5-4.5 | 0.4-1.0 | 0.4-0.8 |
0.1 | 0.25 | 0.15 | - | 0.15 | Rest | 2024 | 0.5 | 0.5 | 3.8-4.9 |
0.3-0.9 | 1.2-1.8 | 0.1 | 0.25 | 0.15 | - | 0.15 | Rest | 5052 | 0.25 |
0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.1 | - | - | 0.15 | Rest |
5056 | 0.3 | 0.4 | 0.1 | 0.05-0.20 | 4.5-5.6 | 0.05-0.20 | 0.1 | - | - |
0.15 | Rest | 5083 | 0.4 | 0.4 | 0.1 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | 0.25 |
0.15 | - | 0.15 | Rest | 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 |
0.3 | 0.2 | 0.15 | - | 0.15 | Rest | 6061 | 0.4-0.8 | 0.70 | 0.15-0.40 |
0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | - | 0.15 | Rest | 6063 | 0.2-0.6 |
0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | - | 0.15 | Rest |
6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | 0.2 | 0.1 | - |
Product Details:
Processing:
Other product:
