Home Companies JIANGSU LIANZHONG METAL PRODUCTS (GROUP) CO., LTD

SUS30408 304l Stainless Steel Cold Rolled Coil 0.6 0.7 Thick HL Mirror Surface

Contact Us

[China]

Trade Verify

Address: Guang Yi Columbus B Tower, Wuxi, Jiangsu, China

Contact name:Vera

JIANGSU LIANZHONG METAL PRODUCTS (GROUP) CO., LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

SUS30408 304l Stainless Steel Cold Rolled Coil 0.6 0.7 Thick HL Mirror Surface

Country/Region	china
City & Province	wuxi jiangsu
Categories	Metal Processing Machinery

Product Details

SUS30408 304l Stainless Steel Coil Cold Rolled 0.6 0.7 Thic HL Mirror Surface

What is S30408 material equivalent to?

The S30408 austenitic stainless steel plates (UNS S30408 grade equivalent to EU standards in 1.4301; S30408 is also equivalent to ASTM standard ASTMA240 304) are prepared of standard specimens.

What is the difference between SS and SUS?

As you may have guessed, “SS” is the abbreviation for “stainless steel.” It's the American way of listing steel grades (ex: SS grade 316). “SUS,” on the other hand, is the typical Japanese Industrial Standards (JIS) designation for stainless steel grades. It stands for “steel use stainless.”

NORMAL SIZE

Thickness (mm)	Width(mm)
Thickness (mm)	600-999	1000	1200	1219	1250	1500
0.12-0.19	√	√	√	√	√
0.20-0.29	√	√	√	√	√
0.30-0.39	√	√	√	√	√
0.40-0.49	√	√	√	√	√
0.50-0.59	√	√	√	√	√
0.60-0.69	√	√	√		√	√
0.70-0.79	√	√	√		√	√
0.80-0.89	√	√	√		√	√
0.90-0.99	√	√	√		√	√
1.00-1.20	√	√	√		√	√

Product Name	Stainless Steel Coil / Strip / Sheets
Standard	AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc.
Material	201, 202, 301, 302, 303, 304, 304L, 304H, 310S, 316, 316L, 317L, 321, 310S, 309S, 410, 410S,420, 430, 431, 440A, 904L, 2205, 2507, ect.
Thickness(mm)	Cold rolled:0.25mm-3.0mmHot rolled: 3.0mm-180mmAs Your Request
Width(mm)	Hot rolled regular width:1500,1800,2000, As Your RequestCold rolled regular width:1000,1219,1250,1500,As Your Request
Technique	Hot rolled / cold rolled
Length	1-12m or as Your Request
Surface	2B,BA(bright annealed) NO.1 NO.2 NO.3 NO.4,2D, 4K, 6K, 8K HL(Hair Line), SB, Embossed,as your request
Application	Furniture, doors, kitchen appliances, structural material, commercial use, structural use ,roofing,corrugated roofing, household appliance, industry, auto parts,cold roomse, etc.
Packing	Standard Sea-worthy Packing / As Your Request
International certification method:	ISO SGS BV CE

Stainless Steel Chemical Composition Chart, Percentage (%)
Stainless Steel	C, ≤	Mn, ≤	P, ≤	S, ≤	Si, ≤	Cr	Ni	Mo	N, ≤	Other Elements, ≤
304	0.08	2.00	0.045	0.03	1.00	18.0-20.0	8.0-11.0	–	–	–
304L	0.03	2.00	0.045	0.03	1.00	18.0-20.0	8.0-12.0	–	–	–
316	0.08	2.00	0.045	0.030	1.00	16.0-18.0	10.0-14.0	2.00-3.00	–	–
316L	0.03	2.00	0.045	0.030	1.00	16.0-18.0	10.0-14.0	2.00-3.00	–	–
321	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	0.10	≥ Ti 5×(C+N), ≤ 0.70
201	0.15	5.50-7.50	0.06	0.03	1.00	16.0-18.0	3.5-5.5	–	0.25	–
202	0.15	7.50-10.00	0.06	0.03	1.00	17.0-19.0	4.0-6.0	–	0.25	–
205	0.12-0.25	14.0-15.5	0.06	0.03	1.00	16.5-18.0	1.0-1.7	–	0.32-0.40	–
301	0.15	2.00	0.045	0.03	1.00	16.0-18.0	6.0-8.0	–	0.10	–
301L	0.03	2.00	0.045	0.03	1.00	16.0-18.0	6.0-8.0	–	0.20	–
301LN	0.03	2.00	0.045	0.03	1.00	16.0-18.0	6.0-8.0	–	0.07-0.20	–
302	0.15	2.00	0.045	0.03	0.75	17.0-19.0	8.0-10.0	–	0.10	–
302B	0.15	2.00	0.045	0.03	2.00-3.00	17.0-19.0	8.0-10.0	–	0.10	–
303	0.15	2.00	0.2	≥0.15	1.00	17.0-19.0	8.0-10.0	–	–	–
303Se	0.15	2.00	0.2	0.06	1.00	17.0-19.0	8.0-10.0	–	–	Se 0.15
304H	0.04-0.10	2.00	0.045	0.03	0.75	18.0-20.0	8.0-10.5	–	–	–
304N	0.08	2.00	0.045	0.03	1.00	18.0-20.0	8.0-11.0	–	0.10-0.16	–
304LN	0.03	2.00	0.045	0.03	1.00	18.0-20.0	8.0-11.0	–	0.10-0.16	–
305	0.12	2.00	0.045	0.03	1.00	17.0-19.0	11.0-13.0	–	–	–
308	0.08	2.00	0.045	0.03	1.00	19.0-21.0	10.0-12.0	–	–	–
309	0.2	2.00	0.045	0.03	1.00	22.0-24.0	12.0-15.0	–	–	–
309S	0.08	2.00	0.045	0.03	1.00	22.0-24.0	12.0-15.0	–	–	–
309H	0.04-0.10	2.00	0.045	0.03	0.75	22.0-24.0	12.0-15.0	–	–	–
309Cb	0.08	2.00	0.045	0.03	1.00	22.0-24.0	12.0-16.0	–	–	≥ Cb 10 x C, ≤1.10
309HCb	0.04-0.10	2.00	0.045	0.03	0.75	22.0-24.0	12.0-16.0	–	–	≥ Cb 10 x C, ≤1.10
310	0.25	2.00	0.045	0.03	1.5	24.0-26.0	19.0-22.0	–	–	–
310S	0.08	2.00	0.045	0.03	1.5	24.0-26.0	19.0-22.0	–	–	–
310H	0.04-0.10	2.00	0.045	0.03	0.75	24.0-26.0	19.0-22.0	–	–	–
310Cb	0.08	2.00	0.045	0.03	1.5	24.0-26.0	19.0-22.0	–	–	≥ Cb 10 x C, ≤ 1.10
310 MoLN	0.02	2.00	0.03	0.01	0.5	24.0-26.0	20.5-23.5	1.60-2.60	0.09-0.15	–
314	0.25	2.00	0.045	0.03	1.50-3.00	23.0-26.0	19.0-22.0	–	–	–
316H	0.04-0.10	2.00	0.045	0.03	0.75	16.0-18.0	10.0-14.0	2.00-3.00	–	–
316Ti	0.08	2.00	0.045	0.03	1.00	16.0-18.0	10.0-14.0	2.00-3.00	0.1	≥ Ti 5 × (C + N), ≤0.70
316Cb	0.08	2.00	0.045	0.03	1.00	16.0-18.0	10.0-14.0	2.00-3.00	0.1	≥ Cb 10 × C, ≤ 1.10
316N	0.08	2.00	0.045	0.03	1.00	16.0-18.0	10.0-14.0	2.00-3.00	0.10-0.16	–
316LN	0.03	2.00	0.045	0.03	1.00	16.0-18.0	10.0-13.0	2.00-3.00	0.10-0.16	–
317	0.08	2.00	0.045	0.03	1.00	18.0-20.0	11.0-15.0	3.0-4.0	0.1	–
317L	0.03	2.00	0.045	0.03	0.75	18.0-20.0	11.0-15.0	3.0-4.0	0.1	–
317LM	0.03	2.00	0.045	0.03	0.75	18.0-20.0	13.5-17.5	4.0-5.0	0.2	–
317LMN	0.03	2.00	0.045	0.03	0.75	17.0-20.0	13.5-17.5	4.0-5.0	0.10-0.20	–
317LN	0.03	2.00	0.045	0.03	0.75	18.0-20.0	11.0-15.0	3.0-4.0	0.10-0.22	–
321	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	0.1	≥ Ti 5 × (C + N), ≤ 0.70
321H	0.04-0.10	2.00	0.045	0.03	0.75	17.0-19.0	9.0-12.0	–	–	≥ Ti 4 × (C + N), ≤ 0.70
334	0.08	1.00	0.03	0.015	1.00	18.0-20.0	19.0-21.0	–	–	Al 0.15-0.60, Ti 0.15-0.60
347	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	–	≥ Cb 10 × C, ≤ 1.00
347H	0.04-0.10	2.00	0.045	0.03	0.75	17.0-19.0	9.0-13.0	–	–	≥ Cb 8 × C, ≤ 1.00
347LN	0.005-0.020	2.00	0.045	0.03	1.00	17.0-19.0	9.0-13.0	–	0.06-0.10	Cb 0.20-0.50, 15 × C ≥
348	0.08	2.00	0.045	0.03	1.00	17.0-19.0	9.0-12.0	–	–	Cb 10×C-1.10, Ta 0.10, Co 0.20
348H	0.04-0.10	2.00	0.045	0.03	0.75	17.0-19.0	9.0-13.0	–	–	(Cb + Ta) 8×C ≥ , 1.00 ≤, Ta 0.10, Co 0.20
2205	0.03	2.00	0.03	0.02	1.00	22.0-23.0	4.5-6.5	3.0-3.5	0.14-0.20	–
2304	0.03	2.5	0.04	0.03	1.00	21.5-24.5	3.0-5.5	0.05-0.60	0.05-0.60	–
255	0.04	1.5	0.04	0.03	1.00	24.0-27.0	4.5-6.5	2.9-3.9	0.10-0.25	Cu 1.50-2.50
2507	0.03	1.2	0.035	0.02	0.8	24.0-26.0	6.0-8.0	3.0-5.0	0.24-0.32	Cu ≤0.50
329	0.08	1.00	0.04	0.03	0.75	23.0-28.0	2.0-5.00	1.00-2.00	–	–
403	0.15	1.00	0.04	0.03	0.5	11.5-13.0	–	–	–	–
405	0.08	1.00	0.04	0.03	1.00	11.5-14.5	≤0.5	–	–	Al 0.10-0.30
410	0.08-0.15	1.00	0.04	0.03	1.00	11.5-13.5	–	–	–	–
410S	0.08	1.00	0.04	0.03	1.00	11.5-13.5	≤0.6	–	–	–
414	0.15	1.00	0.04	0.03	1.00	11.5-13.5	1.25-2.50	–	–	–
416	0.15	1.25	0.06	≥0.15	1.00	12.0-14.0	–	–	–	–
416Se	0.15	1.25	0.06	≥0.06	1.00	12.0-14.0	–	–	–	Se 0.15
420	0.15, ≥	1.00	0.04	0.03	1.00	12.0-14.0	–	–	–	–
420F	0.30-0.40	1.25	0.06	≥0.15	1.00	12.0-14.0	≤0.5	–	–	Cu 0.60
420FSe	0.20-0.40	1.25	0.06	0.15	1.00	12.0-14.0	≤0.5	–	–	Se 0.15; Cu 0.60
422	0.20-0.25	0.50-1.00	0.025	0.025	0.5	11.0-12.5	0.50-1.00	0.90-1.25	–	V (0.20-0.30), W (0.90-1.25)
429	0.12	1.00	0.04	0.03	1.00	14.0-16.0	–	–	–	–
430	0.12	1.00	0.04	0.03	1.00	16.0-18.0	–	–	–	–
430F	0.12	1.25	0.06	≥0.15	1.00	16.0-18.0	–	–	–	–
430FSe	0.12	1.25	0.06	0.06	1.00	16.0-18.0	–	–	–	Se 0.15
439	0.03	1.00	0.04	0.03	1.00	17.0-19.0	≤0.5	–	0.03	≥ Ti [0.20+4(C+N)], ≤ 1.10; Al 0.15
431	0.2	1.00	0.04	0.03	1.00	15.0-17.0	1.25-2.50	–	–	–
434	0.12	1.00	0.04	0.03	1.00	16.0-18.0	–	0.75-1.25	–
436	0.12	1.00	0.04	0.03	1.00	16.0-18.0	–	0.75-1.25	–	≥ Cb 5×C, ≤ 0.80
440A	0.60-0.75	1.00	0.04	0.03	1.00	16.0-18.0	–	≤0.75	–	–
440B	0.75-0.95	1.00	0.04	0.03	1.00	16.0-18.0	–	≤0.75	–	–
440C	0.95-1.20	1.00	0.04	0.03	1.00	16.0-18.0	–	≤0.75	–	–
440F	0.95-1.20	1.25	0.06	0.15	1.00	16.0-18.0	≤0.5	–	–	Cu ≤0.60
440FSe	0.95-1.20	1.25	0.06	0.06	1.00	16.0-18.0	≤0.5	–	–	Se ≤0.15; Cu ≤0.60
442	0.2	1.00	0.04	0.04	1.00	18.0-23.0	≤0.6	–	–
444	0.025	1.00	0.04	0.03	1.00	17.5-19.5	≤1.00	1.75-2.50	0.035	Ti+Cb 0.20+4 × (C+N)-0.80
446	0.2	1.5	0.04	0.03	1.00	23.0-27.0	≤0.75	–	0.25	–
800	0.1	1.5	0.045	0.015	1.00	19.0-23.0	30.0-35.0	–	–	Cu 0.75; ≥ FeH 39.5; Al 0.15-0.60
800H	0.05-0.10	1.5	0.045	0.015	1.00	19.0-23.0	30.0-35.0	–	–	Cu 0.75; ≥ FeH 39.5; Al 0.15-0.60
904L	0.02	2.00	0.045	0.035	1.00	19.0-23.0	23.0-28.0	4.00-5.00	0.1	Cu 1.00-2.00
Alloy 20	0.07	2.00	0.045	0.035	1.00	19.0-21.0	32.0-38.0	2.00-3.00	–	Cu 3.0-4.0; ≥ Nb 8 × C; ≤1.00
XM-1	0.08	5.0-6.5	0.04	0.18-0.35	1.00	16.00-18.0	5.0-6.5	–	–	Cu 1.75-2.25
XM-2	0.15	2.00	0.05	0.11-0.16	1.00	17.0-19.0	8.0-10.0	0.40-0.60	–	Al 0.60-1.00
XM-5	0.15	2.5-4.5	0.2	≥0.25	1.00	17.0-19.0	7.0-10.0	–	–	–
XM-6	0.15	1.50-2.50	0.06	≥0.15	1.00	12.0-14.0	–	–	–	–
XM-10	0.08	8.0-10.0	0.045	0.03	1.00	19.0-21.5	5.5-7.5	–	0.15-0.40	–
XM-11	0.04	8.0-10.0	0.045	0.03	1.00	19.0-21.5	5.5-7.5	–	0.15-0.40	–
XM-15	0.08	2.00	0.03	0.03	1.50-2.50	17.0-19.0	17.5-18.5	–	–	–
XM-17	0.08	7.50-9.00	0.045	0.03	0.75	17.5-22.0	5.0-7.0	2.00-3.00	0.25-0.50	–
XM-18	0.03	7.50-9.00	0.045	0.03	0.75	17.5-22.0	5.0-7.0	2.00-3.00	0.25-0.50	–
XM-19	0.06	4.0-6.0	0.045	0.03	1.00	20.5-23.5	11.5-13.5	1.50-3.00	0.20-0.40	Cb 0.10-0.30, V 0.10-0.30
XM-21	0.08	2.00	0.045	0.03	0.75	18.0-20.0	8.0-10.5	–	0.16-0.30	–
XM-27	0.01	0.4	0.02	0.02	0.4	25.0-27.5	≤0.5	0.75-1.50	0.015	Cu 0.20; Cb 0.05-0.20; (Ni + Cu) 0.50
XM-33	0.06	0.75	0.04	0.02	0.75	25.0-27.0	≤0.5	0.75-1.50	0.04	Cu 0.20; Ti 0.20-1.00; ≥ Ti 7(C+N)
XM-34	0.08	2.5	0.04	≥0.15	1.00	17.5-19.5	–	1.50-2.50	–	–
PH 13-8Mo	0.05	0.2	0.01	0.008	0.1	12.25-13.25	7.5-8.5	–	–	–
15-5 PH	0.07	1	0.04	0.03	1	14.0-15.5	3.5-5.5	–	–	2.5-4.5 Cu; 0.15-0.45 Nb
17-4 PH	0.07	1	0.04	0.03	1	15.5-17.5	3.0-5.0	–	–	3.0-5.0 Cu; 0.15-0.45 Nb
17-7 PH	0.09	1	0.04	0.04	1	16.0-18.0	6.5-7.75	–	–	0.75-1.5 Al

Packing and transportation:

About Us:

We provide customers with different specifications and materials for stainless with 10 years' experience.Special Purpose with high quality, fast delivery, competitive price and excellent exprience of after-sale service.We have keep highly appreciated cooperation with purchasers from many countries .If you are interested in our products, please feel free to contact me any time! Welcome to hear from your inquiry!

Certificates:

CUSTOMER:

FEEDBACK:

FAQ:

How about the delivery time?

Within 15-30days after receiving the deposit or L/C at sight. Of course, the detail will be confirmed by the quantity and the different products.

How to order?

Please send us your purchase order by email. Or you can ask us to send you a proforma invoice for your order. We need to know the following information for your order.

What is shipment terms?

1. Container ship 2. bulk ship 3. Train

Do you have English Mill Test Certificates?

Yes,that is what we give gurantee to our clients

Do you accept the third party inspection?

Yes,absolutely we accept.