Active Member
|
[China]
Address: Rm.640,Builing B, Guolian Metal Union Trade Center ,Liangxi District ,Wuxi ,Jiangsu Province ,China
Contact name:Cathy Zhang
Wuxi Shuangti Stainless Steel Co., Ltd. |
|
|
| Name | 200 Series 201 202 High And Half Copper Cold Roll Polished Hairline Finish Stainless Steel Sheet |
| Grade | 201/202... |
| Technology | Cold Rollinf |
| Surface | NO.1,2b,8k,2d,BA,NO.4,NO.6,No.8,etc... |
| Thinkness | Cold Rolled 0.3mm-6mm |
| Width | 1219mm or as custome's requires |
| Packing | Export sea worthy package |
| Sample | Free! |
| MOQ | 10 KGS |
| Payment | TT, L/C |
| Delivery | 5-7 days |
Stainless Steel Surface Treatments
1D—The surface has discontinuous particles, which is also called
matte. Processing technology: hot rolling + annealing shot peening
pickling + cold rolling + annealing pickling.
2D—Slightly shiny silver-white. Processing technology: hot rolling
+ annealing shot peening pickling + cold rolling + annealing
pickling.
2B—Silver white and better gloss and flatness than 2D surface.
Processing technology: hot rolling + annealing shot peening
pickling + cold rolling + annealing pickling + quenching and
tempering rolling.
BA—The surface gloss is excellent and has a high reflectivity, just
like the mirror surface. Processing technology: hot rolling +
annealing shot peening pickling + cold rolling + annealing pickling
+ surface polishing + quenched and tempered rolling.
No.3—has better gloss and rough surface. Processing technology:
Polishing and tempering rolling of 2D products or 2B with 100 ~ 120
abrasive materials.
No.4—has better gloss and fine lines on the surface. Processing
technology: Polishing and tempering rolling of 2D products or 2B
with 150 ~ 180 abrasive materials.
HL—Silver gray with hair streaks. Processing technology: Polish the
2D product or 2B product with a suitable size of abrasive material
to make the surface appear continuous grain.
MIRROR Machining —is in a mirror state. Processing technology: 2D
or 2B products are ground and polished to a mirror effect with a
suitable abrasive material.
Corresponding photo of stainless steel surface treatment
Stainless Steel Composition Contents Proportion Table
| 200 series | |||||||||||||
| Grade | chemical composition (%) | mechanic performances | |||||||||||
| C | Si | Mn | P | S | Ni | Cr | N | Cu | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB | |
| 201(1%nickel) | ≤0.15 | ≤1.00 | 8∽11 | ≤0.060 | ≤0.030 | 0.9∽1.5 | 15∽17 | ≤0.25 | 1.5∽2 | ≥310 | ≥655 | ≥35 | ≤105 |
| 202(4%nickel) | ≤0.15 | ≤1.00 | 6∽9 | ≤0.060 | ≤0.030 | 3.5∽5 | 15∽17 | ≤0.25 | 1.5∽2 | ≥260 | ≥620 | ≥40 | ≤100 |
| The specification of type 201&202 in conformity with Mill Standard | |||||||||||||
| 300 series | |||||||||||||
| Grade | chemical composition (%) | mechanic performances | |||||||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB | ||
| 304 | ≤0.08 | ≤0.75 | ≤2 | ≤0.045 | ≤0.030 | 8∽10 | 18∽20 | ≥205 | ≥520 | ≥40 | ≤90 | ||
| 301 | ≤0.15 | ≤1.00 | ≤2 | ≤0.045 | ≤0.030 | 6∽8 | 16∽18 | ≥205 | ≥515 | ≥40 | ≤95 | ||
| 316 | ≤0.08 | ≤1.00 | ≤2 | ≤0.045 | ≤0.030 | 10∽14 | 16∽18 | 2∽3 | ≥205 | ≥515 | ≥40 | ≤90 | |
| 316L | ≤0.03 | ≤1.00 | ≤2 | ≤0.045 | ≤0.030 | 12∽15 | 16∽18 | 2∽3 | ≥170 | ≥480 | ≥40 | ≤95 | |
| The specification of type 301,302,304,304L,309S,310S,316,316L,321,347 in conformity with ASTM & JIS criteria | |||||||||||||
| 400 series | |||||||||||||
| Grade | chemical composition (%) | mechanic performances | |||||||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB | ||
| 430 | ≤0.12 | ≤1.00 | ≤1 | ≤0.040 | ≤0.030 | 16∽18 | ≥450 | ≥205 | ≥22 | ≤88 | |||
| The specification of type 430,410,420J1.420J2 in conformity with ASTM & JIS criteria | |||||||||||||
| 630 series | |||||||||||||
| Grade | chemical composition (%) | mechanic performances | |||||||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | Nb | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB | |
| 630 | ≤0.07 | ≤1.00 | ≤1.00 | ≤0.035 | ≤0.030 | 6.50∽7.50 | 15.50∽17.50 | 0.15∽0.45 | ≥450 | ≥205 | ≥22 | ≤88 | |
| The specification of type 630 in conformity with ASTM & JIS standard | |||||||||||||
product photos
Related products
Main Products
ⅠStainless Steel Plate.
Stainless steel plate surface is shining & polish,it has great fabricability with toughness & mechanic strength .It can anti-corrode acid or alkaline gas ,solution & other agents corrosion .
Stainless steel is a kind of alloyed steel ,it’s not inclined to rust .It has wide applications in many industries .It has many merits in anti-corrosion ,heat-resistance ,low temperature resistance and good performances of cold mechanic processing .
By the material divisions ,it can be divided into 201,304,304L,316L,310S,etc .
In conformity with executing criteria GB/T3280-2009 “Stainless Steel Cold Rolled Sheet & Ribbon”.
Universal specification dimension ;1000×2000,1220×2440,1500×3000,1500×6000,
1800×6000.It also can be tailored as per fabricated pieces .
Normally international cold rolled stainless steel sheet thickness is from 0.30-5.00 mm;
Hot rolled stainless steel plate thickness :3-16mm.Other irregular pieces thickness can be
Tailored as per client’s special requirements .
GB/T4237-2009 “hot rolled stainless steel plate & ribbon”.
ASTM A240/240M-10 “Pressure vessel and general purposeheat-refractory steel plate”
Π Stainless Steel Pattern Products
Many patterns available for options ,it’s suitable for stair footplates fabrication ,or laying plant anti-corrosion ,abrasion resistant floor
Ш Catch basin & gutter.
All kinds of dimension or thickness can be tailored as per customer’s special requirements .
Ⅳ Stainless steel angle steel ,channel beam ,flat steel,round bar steel ,tube,
Section bars .
Ⅴ. Stainless plate bending
Processing all kinds of irregular dimension pieces
Ⅵ. Stainless steel sheet circulating welding
Air duct production .
Ⅶ Processing capacity Leading 20000W large scale laser cutting machine .
Cutting pieces thickness 50mm by laser is so fast ,high efficient with full automation ,less effective on heat & local deformation .It will be helpful in improving accuracy .It can meet the needs of pieces processing diversities ,and can improve processing capacities ,and aid customers to save costs .
Ⅷ. Stainless steel sheet cutting & bending .
Cutting ,bending & circulating equipment can process length 9 M pieces .It can be
Utilized in all kinds of filling equipment ,air duct pipes .It can provide large
Scale ,precise semi-products processing demands.
Ⅸ. Stainless steel surface processing .
Stainless steel mirror machining ,wire drawing ,plating procession .
Ⅹ. Aluminium alloyed products .
Ⅺ.Alloyed steel
