Color Steel CZ Purlin Roll Forming Machine , Sheet Roll Forming Machine

Color Steel Sheet CZ Purlin Roll Forming Machine CZ Cold Roll Forming Machine

The Cz Shaped Purlin Roll Form Machine adopts a cast-iron structure. The driving way is chain driving. The size will be adjusted by the spacers between the rollers. The cutting is after forming, so the cutting position will be very smooth. There are two punching holes at the two sides of the cutting position. 

Features of C Z purlin interchangeable roll forming machine :

1. The C-type purlin produced has good straightness and good resistance to bending and bending;

2. The Z-shaped purlins produced can be installed in reverse laps, and the installation strength of the connection points is increased;

3. The automatic electronic control system is equipped with an error reporting device to ensure the safety and stability of the production line;

4. The drive adopts geared motor plus frequency conversion control, speed control, fixed-length, and accurate positioning;

5. Can roll CZ two different profiles, saving the user's purchase cost and space;

6. It can realize the conversion of two types of profiles without changing the forming roller, which is fast and efficient

The main parameters of the CZ Purlin Roll Forming Machine

1.  The thickness of raw material:1.5mm-3.2mm, G300-345Mpa HR/CR/GI

2.  Profile drawing of products (as per your requirement)

3.  Forming Machine Structure: machine body formed by welding with high-quality box iron

4. Shaft material: S45C quenched and tempered after finishing treatment

5. Main Shaft diameter:φ80mm

6. Rollers: GCr15 with heat treatment and hard chrome-plated HRC58-62

7. Number of forming stations: 12stations

8. Main motor power: 15kw

9. Cutting: hydraulic shearing after forming

10.  Electronic controlling system: full-frequency PLC controlling system

11.  Different production requirement will be operated from the touch screen

(All technical parameters can be changed, according to your needs.)

 Machine Components:

1.  Manual decoiler or hydraulic decoiler which base on customer 

2.  Feeding and leveling section

3. Main roll forming system

4.  Hydraulic punching and cutting(Pre punching or post punching base on the customer)

5.  Product support frame

6.  PLC Control System

Rolling Forming System:

1. main motor type: phase asynchronous motor

2. main motor power: 30KW

3. speed of forming:15-25m/min

4. The material of the roller: GCr15

5. 20 groups rollers

6. The material of the main shaft: 40Cr (The main shaft have the high frequency grinding &heat Treatment and the surface of the shaft is chroming

7. the diameter of the main shaft: ø70mm

PLC Control System:

1. Control the quantity &punching length& cutting length automatically

2. The Machine will be stopped while it is punching and cutting

3. Automatic Length measures and quantity counting (precision +- 3mm)

4. Voltage: 380V, 3 Phase 50Hz

Extra service if you place orders from us:

1. Guarantee: 12 months guarantee for the machine. If some parts are broken naturally, we will supply them for free.

2. Engineers can offer overseas service if you arrange the round trip ticket and accommodation.

3. The spare parts, such as a limit switch, solenoid, fuse, push button, tube for free.