Q - Switched Fiber Laser Cleaning Machine 200w Customized Laser Beam Mode

Q-switched 200w Handhold Fiber Laser Cleaning Machine for Rust Clean

^{Fiber Laser cleaning Machine is a new generation of industrial metal surface cleaning laser system, which specially design to remove the un-needed surface cover or dust.}

^{It adopts the advanced laser source, laser optical scanners and control system to meet the requirements of metal surface cleaning process.}

^{Our company‘s laser cleaning system is a new generation of industrial surface cleaning high-tech products. The use of international advanced laser, laser optical systems and control systems, to meet the requirements of metal surface cleaning process.}

^{For laser power, we have 100W and 200W to choose. For the machine outlook, we have sealed bench top, also have hand held ones to choose. You can hold the laser head in hand, and remove the dust in any place or corner you like.}

^{It can meet the requirements of laser surface degreasing, rust, paint,zinc film coating laser removing by laser cleaning technology.}

^{Technical Parameters:}

^Application:

^{1 metal surface derusting}

^{2 surface paint removal paint treatment}

^{3 surface without dirt, stains, dirt cleaning}

^{4 surface coating, coating removal}

^{5 welding surface / spray surface pretreatment}

^{6 stone surface dust and attachment removal}

^{7 rubber mold residue cleaning}

Typical Application - Rust Removal:

High energy pulsed laser focusing on the surface of object to simulate plasma, continuous irradiation of high-energy plasma instantaneous formation and expansion, resulting in a series of tiny explosions, formating plasma blasting, finally achieve the relativel smooth corrosive layer of boject surface to physical blasting burst, and move through the high speed laser spot to form a plume that will clean the debris to complete the cleaning. Mainly used in metal rust.

Typical Application——Degrease:

High energy pulsed laser socusing on the surface of object,dirty rust and other irregular structure and dark surface absorpt the laser energy and plasma energy formated by metal surface, is instantaneous vaporization from the base metal. Mainly used in the mold cleaning and cultural relics repair and other industries.

Typical Application——Paint Removal:

For the paint and the surface of the chemical coating and special process, based on the surface and the base material has different absorption and damage threshold on laser, laser destruct the surface coating after focusing, after air contact, there are a series of complex photochemical reactions, oxidation, The final reaction product is in the form of gas discharge, the special mode of the laser below the masterbatch damage threshold, can peel off the coating, do not hurt the base material. Mainly used for paint removal and coating stripping.

Laser cleaning-working parameters:

^{1. Laser cleaning has no grinding, non-contact, no thermal effect}

^{2. Rapid, clean and accurate cleaning, removal of surface coatings, coatings, oxide;}

^{3. No damage to substrate of the products;}

^{4. High cleaning precision, strong controllability;}

^{5. Can be used for a long time, low operating costs;}

^{6. The device can realize automatic operation and simple operation;}

^{7. Environmentally friendly, no supplies, no two pollution}

^{8. It is suitable for various materials, etc.}