|
[China]
Trade Verify
Address: A-709 Zhengshang International Building, Fengcheng 8 Road,Xi'an,China
Contact name:Shirley
Shaanxi Fortune Industries Co.ltd |
|
Verified Suppliers
|
|
|
OWC612GXRZ Powder Metallurgy One Way Needle Clutch Bearing
Product Profiles
Powder metallurgy is a mixture of metal powder and non-metal powder
as a raw material. The process is completed by molding,sintered,
precision shaping, surface treatment.
The powder metallurgy process can produce hundreds of parts of
various types, and can design and produce structural parts with
complex geometric shapes and high mechanical properties and
precision requirements. Powder metallurgy material include:
stainless steel, copper base, iron base. Products include power
tool parts, oil-impregnated bearings, gears, special-shaped parts,
electrical components, medical equipment, lock parts, stainless
steel parts, garden tool parts, auto parts, mechanical transmission
parts, hardware accessories, etc. The products are closely matched
with domestic and foreign mechanical parts manufacturers, most of
which are exported to developed countries such as Europe and
America.
TECHNICAL PARAMETER
| Shaft Dia. | Model | Weight | Size (mm) | Driving Torque | ||
| mm | g | Inner Dia. | Outer Dia. | Height | ( Nm ) | |
| 4 | OWC 410 | 1.8 | 4 | 10 | 5.4 | 2.8 |
| 5 | OWC 511 | 2 | 5 | 11 | 5.4 | 3.5 |
| 6 | OWC 612 | 2.3 | 6 | 12 | 5.4 | 5.2 |
| 8 | OWC 814 | 2.8 | 8 | 14 | 5.4 | 6.1 |
| 10 | OWC 1016 | 3 | 10 | 16 | 5.4 | 9.5 |
| 4 | OWC 406 | 1.6 | 4 | 8 | 6 | 2.5 |
| 4 | OWC 408 | 1.8 | 4 | 8 | 8 | 3.1 |
| 6 | OWC 612-8.4 | 2.35 | 6 | 12 | 8.4 | 6.8 |
| 6 | OWC 61407 | 2.1 | 6 | 14 | 7 | 6.6 |
| 6 | OWC 720 | 2.5 | 6 | 12.7 | 7.5 | 7.3 |
| 6 | OWC 087 | 2.38 | 6 | 10.2 | 8 | 4.6 |
| 6 | OWC 178 | 3 | 6 | 10.2 | 15 | 7.3 |
| 8 | OWC 81607 | 2.6 | 8 | 16 | 7 | 7.5 |
| 8 | OWC 812 | 3 | 8 | 12.7 | 7.3 | 6.8 |
| 8 | OWC 816-5.5 | 3.5 | 8 | 16 | 5.5 | 8.2 |
| 8 | OWC 816-6.2 | 3.8 | 8 | 16 | 6.2 | 8.8 |
| 10 | OWC 1008 | 3.35 | 10 | 16 | 8 | 9.7 |
| 10 | OWC 1019 | 8.5 | 10 | 19 | 11 | 19.8 |
| 17 | OWC 173512 | 22.5 | 17 | 35 | 12 | 78 |
| 17 | OWC 173516 | 25.5 | 17 | 35 | 16 | 95 |
| 17 | OWC 203316 | 23 | 20 | 33 | 16 | 108 |
The Advantage of Powder Metallurgy Process
①Cost effective
The final products can be compacted with powder metallurgy method
,and no need or can shorten the processing of machine .It can save
material greatly and reduce the production cost .
②Complex shapes
Powder metallurgy allows to obtain complex shapes directly from the
compacting tooling ,without any machining operation ,like teeth
,splines ,profiles ,frontal geometries etc.
③High precision
Achievable tolerances in the perpendicular direction of compacting
are typically IT 8-9 as sintered,improvable up to IT 5-7 after
sizing .Additional machining operations can improve the precision .
④Self-lubrication
The interconnected porosity of the material can be filled with oils
,obtaining then a self-lubricating bearing :the oil provides
constant lubrication between bearing and shaft ,and the system does
not need any additional external lubricant .
⑤Green technology
The manufacturing process of sintered components is certified as
ecological ,because the material waste is very low ,the product is
recyclable ,and the energy efficiency is good because the material
is not molten.
