|
[China]
Trade Verify
Address: Building 2#,No.1000 Tiangong Avenue,Xinxing Street,Tianfu New Area,Chengdu Sichuan Province, 610213, China
Contact name:Zander
Sichuan Trixon Communication Technology Corp.,Ltd |
|
Verified Suppliers
|
|
|
125M/1.25G SGMII Transceiver Module,10km,1310nm,-5℃~75℃ with DDMI,TMS-DR10-31DCR
The Serial-Gigabit-Medium-Interface-Transceiver (SGMII Transceiver) is a high performance, hot-pluggable transceiver module designed for duplex LC connector interface and Serial-Gigabit-Medium-Interface-Transceiver (SGMII) interface, offering data rates up to 1.25Gbps. It is compliant with IEEE 802.3 and is designed to operate across wide temperature range of -5℃~75℃. The SGMII Transceiver module supports both full-duplex and half-duplex operations, and is compliant with both the SGMII and 1000BASE-X standards. It is designed to provide reliable and cost-effective data transmission in high speed communication systems.
The SGMII Transceiver module provides a reliable, low-cost solution for high-speed data transmission, enabling systems to reach data rates of up to 1.25Gbps. The module is hot-pluggable, allowing for easy installation and maintenance. The module is compliant with IEEE 802.3 and is designed to operate across a wide temperature range. It supports both full-duplex and half-duplex operations, and is compliant with both the SGMII and 1000BASE-X standards.
The SGMII Transceiver module is ideal for applications requiring high-speed data transmission, such as 10G Ethernet, Fibre Channel, Storage Area Networks (SANs), and other high-speed communication systems. The module is designed to provide reliable and cost-effective data transmission, meeting the needs of a wide variety of applications.
| Parameters | Description |
|---|---|
| Interface Type | SGMII Interface |
| Product Name | 125M/1.25G SGMII Transceiver |
| Data Rate | 125M/1.25G |
| Distance | 10km |
| Hot Pluggable | Yes |
| Connector Interface | Duplex LC |
| Operating Temperature | -5℃~75℃ |
| Compliant | Compliant With MSA SFP Specification SFF-8472 |
TMS-DR10-31D(N)CR (1310nm, 10km, FP-LD, PINTIA)
| Parameter | Symbol | Min | Typ. | Max | Unit | Note | ||
| Transmitter | ||||||||
| Centre Wavelength | λc | 1280 | 1310 | 1340 | nm | |||
| Spectral Width*Note4 | ∆λ | 4 | nm | FP-LD | ||||
| Average Output Power | 100BASE | POUT | -15 | -8 | dBm | |||
| 1000BASE | -9 | -3 | dBm | |||||
| Extinction Ratio | ER | 9 | dB | |||||
| Average Power of OFF Transmitter | POFF | -45 | dBm | |||||
| Output Optical Eye | Compliant with IEEE 802.3ah-2004 | |||||||
| Receiver | ||||||||
| Centre Wavelength | λc | 1200 | 1600 | nm | ||||
| Sensitivity*Note5 | 100BASE | PIN | -28 | dBm | ||||
| 1000BASE | -22 | dBm | ||||||
| Receiver Overload | Overload | -3 | dBm | |||||
| Optical Return Loss | 12 | dB | ||||||
| LOS Assert | 100BASE | LOSA | -45 | dBm |
| |||
| 1000BASE | -35 | |||||||
| LOS De-Assert | 100BASE | LOSD | -30 | dBm |
| |||
| 1000BASE | -25 | |||||||
| LOS Hysteresis | 0.5 | 4 | dB | |||||
The Trixon TMS-DR10-31DCR is a 125M/1.25G Serial-Gigabit-Medium-Interface (SGMII) Transceiver that is made in China. It is designed to transmit data over a distance of up to 10km and is hot pluggable for easy installation. It has a SGMII interface that supports both 125M and 1.25G data rates, making it an ideal choice for both short and long-distance data transmission. The SGMII transceiver is designed to be reliable and efficient, with minimal power consumption and high data throughput. It is also highly compatible with existing networking systems.
The SGMII Transceiver provides technical support and services for customers. Our support team is available 24/7 to answer any questions and provide assistance with installation, configuration, and troubleshooting. We also offer on-site training and consultations to ensure that customers are able to use the product to its fullest potential. Additionally, we provide regular software and firmware updates to ensure the product is always up to date. If customers ever encounter any issues, our team is available to help resolve them quickly and efficiently.
The SGMII Transceiver will be packaged and shipped in a manner that is safe and secure for the product. Packaging materials will include bubble wrap, foam, and cardboard boxes. The transceiver will be placed in an anti-static bag for extra protection. The product will then be placed in a box and sealed with tape. A shipping label will be placed on the box that includes the customer's address and contact information.
The box will then be placed in a larger box or container for shipping. The container will be filled with cushioning material to protect the product during transit. The container will be sealed with tape and a shipping label will be placed on it. The package will then be ready to be shipped to the customer.
Reference Datasheet File code: DS060008
