|
[China]
Trade Verify
Address: Building 2#,No.1000 Tiangong Avenue,Xinxing Street,Tianfu New Area,Chengdu Sichuan Province, 610213, China
Contact name:Zander
Sichuan Trixon Communication Technology Corp.,Ltd |
|
Verified Suppliers
|
|
|
The SFP+ Transceiver Module is a Small Form-Factor Pluggable Plus Transceiver Module designed to interface with 10Gbps networking devices. It is compliant with the MSA SFF-8472 standard, and can be used with Single-Mode fibers. The module is equipped with an LC Connector, and is capable of supporting a data rate of up to 10Gbps. It is designed to work with a wide variety of networking equipment, and provides a reliable and cost-effective solution for high-speed networking applications.
| Parameter | Specification |
|---|---|
| Temperature Range | -5~70°C |
| Wavelength | TX1310nm RX1270nm |
| Compliant Code | MSA SFF-8472 |
| Data Rate | 10Gbps |
| Cable Type | Duplex |
| Fiber Type | Single-Mode |
| Connector Type | LC |
| Product Name | SFP+ Transceiver Module |
| Distance | 60km |
| DDM/DOM | Yes |
| Parameter | Symbol | Min | Typ. | Max | Unit |
| Transmitter | |||||
| Centre Wavelength | λc | 1320 | 1330 | 1340 | nm |
Side Mode Suppression Ratio | SMSR | 30 | - | - | dB |
| Spectral Width (-20dB) | Δλ | - | - | 1 | nm |
| Average Output Power*note6 | Pout | +1 | - | +6 | dBm |
| Extinction Ratio | ER | 3.5 | - | - | dB |
| Average Power of OFF Transmitter | Pout-off | - | - | -30 | dBm |
| Transmitter Dispersion Penalty | TDP | - | - | 2 | dB |
| Relative Intensity Noise | RIN | - | - | -128 | dB/Hz |
| Output Optical Eye | Compliant with IEEE802.3ae-2005 | ||||
| Receiver | |||||
| Centre Wavelength | λc | 1260 | - | 1280 | nm |
| Receiver Sensitivity*note7 | SEN | - | - | -20 | dBm |
| Receiver Overload | Pmax | -7 | - | - | dBm |
| LOS De-Assert | LOSD | - | - | -18 | dBm |
| LOS Assert | LOSA | -30 | - | - | dBm |
| LOS Hysteresis | LOSH | 0.5 | - | 4 | dB |
Enterprise network: Can be used to connect enterprise network equipment, such as switches, routers and firewalls, to achieve high-speed and stable data transmission.
Data center: Suitable for data center environments, can connect servers, storage devices and network devices, provide high bandwidth and long-distance transmission, and meet the high density and high performance requirements of data centers.
Financial transactions: It can provide reliable, low-latency data transmission and is suitable for connecting trading servers, trading platforms and market data systems to ensure fast and stable transaction execution.
Telecommunications operators: As part of the telecommunications infrastructure, it is suitable for optical fiber communication networks, connecting optical fiber transmission equipment, optical fiber switches and optical fiber access equipment, and supporting high-speed and long-distance data transmission.
Video surveillance: It can be used in commercial video surveillance systems to transmit high-definition video signals, connect cameras, surveillance video recorders and video management systems, and support long-distance video transmission and monitoring.
Transmission distance: Based on your requirements, we can provide different transmission distance options to suit your specific scene needs.
Wavelength: At your request, we can adjust the wavelength to match your fiber optic network equipment and system requirements.
Power budget: Based on your requirements, we can make power budget adjustments to ensure the signal quality and performance in the transmission link meets your expectations.
Digital diagnostic monitoring: If you require digital diagnostic monitoring capabilities, we can provide corresponding customization options so that you can monitor and manage optical modules.
Connector type: According to your device interface requirements, we can provide different types of connectors, such as LC, SC, ST, etc.
Protocol support: We can provide you with support for specific protocols based on your needs, such as Ethernet, Fiber Channel, etc.
SFP+ Transceiver Module technical support and service includes:
The SFP+ Transceiver Module is packaged in an anti-static bag and shipped in a static-resistant box. It is then placed into a larger cardboard box for shipping. The box is labeled with the product name, a barcode, and the shipping information.
The box is then shipped via courier such as UPS, FedEx, or DHL. The shipping process is tracked using the tracking number provided on the box.
Reference Datasheet file code:DS100037 (10G BIDI)
