Active Member
|
[China]
Address: 3rd Industrial Area, Shanmen Community, Songgang Town, Bao'an District, Shenzhen City 518105, Guangdong Province, China
Contact name:Johnson Gao
Shenzhen GLGNET Electronics Co., LTD |
|
|
Stacked 2X4 SFP+ Cage Connector 8 Port Female PCB SFP Connector with Light Pipe
1. 47007-07M321 Stacked 8 Ports SFP+ Cage Connector with Inner Outer Light Pipe Overview
| GLGNET P/N | 47007-07M321 |
| Description | Stacked 8 Ports SFP+ Cage Connector with Inner Outer Light Pipe |
| Port Configuration | Stacked 8 Ports |
| EMI Spring | Yes |
| Light Pipe | With Inner Outer Light Pipe |
| Heat Sink | No |
| Cage Body Depth (mm) | 63.25 |
| Cage Body Height (mm) | 25.2 |
| Cage Body Width (mm) | 57.45 |
| Cage Pin Length (mm) | 3.05 TYP Press Fit |
| Signal Pin Length (mm) | 2.07 TYP Press Fit |
| Mounting Type | Press Fit |
| Shield Material | 0.25mm thickness coppy alloy |
| EMI Spring Material | 0.1mm thickness coppy alloy |
| Contact Terminal Material | 0.2 mm Phosphor Bronze |
| Connector Housing Material | Glass filled Thermoplastic Black |
| Light Pipe Material | Polycarbonate Color clear |
| Light Pipe Housing Material | PA46 BLACK |
| Cage Surface Plating | Nickel Plating |
| Contact Terminal Plating | 15U" gold Plating, 30U" Available |
| Solder Terminal Plating | Tin Plating |
| Recommended PCB Thickness | 2.36 (min 1.57) |
| Rated Current | 0.5 A Max @ 30℃ |
| Operating Temperature | -40 to +85 ℃ |
| Storage Temperature | -40 to +85 ℃ |
| RoHS Compliant | Yes |
2. 47007-07M321 Stacked 8 Ports SFP+ Cage Connector with Inner Outer Light Pipe Electrical Requirement
| Electrical Requirement | ||
| ITEM | Qualtified Result | Test Condition |
| Contact Resistance | 20 mΩ Max. (Initial States) 40 mΩ Max. (Final States) | 20 mV Max / 100 mA Max |
| Insulation Resistance | 500 MΩ Min. | 500 VDC for 2 minute |
| Dielectric withstanding Voltage | No Damage | 300 VDC / 1 mA for 1 minute |
3. 47007-07M321 Stacked 8 Ports SFP+ Cage Connector with Inner Outer Light Pipe Mechanical Requirement
| ITEM | Qualtified Result | Test Condition |
| Durability | No damaged. Contact Resistance can not be over Final Value | Speed:25mm / minute Cycles:250 Cycles |
| Cage retention(Latch strength of cage) | 110N Min. | Speed:25mm / minute |
| Cage press-fit insertion force | 40N MAX | Speed:25±3mm / minute |
| Cage press-fit extraction force | 11.5 MAX | Speed:25±3mm / minute |
| Vibration | No Damage Disconnect time can not be over 1us Contact Resistance can not be over Final Value | Rate:vary 20-500-20Hz between 1 minute,Direction:3 mutually perpendicular planes,Times:15 minutes in each of cycles,Swings:1.52mm. |
4. 47007-07M321 Stacked 8 Ports SFP+ Cage Connector with Inner Outer Light Pipe Environmental Requirement
| ITEM | Qualtified Result | Test Condition |
| Humidity-Temperature Cycle | No damaged Insulation Resistance and Dielectric withstanding Voltage qualtified | At a temperature of 40±3℃ and relative humidity of 90% - 95% for 96 hours. |
| Humidity-Temperature Cycle | No damaged Contact Resistance can not be over Final Value | between 25±3℃ at 80±3% RH and 65 ±3℃ at 50±3% RH.Ramp times shall be.2.5 hour,dwell times shall be 1 hour.Perform 24 such cycles. |
| Thermal Shock | No damaged Contact Resistance can not be over Final Value | Test temperature -55±3℃ at 30 minute to Standard atmospheric condition 10-15 minute MIN to Test temperature -55±3℃ at 30 minute to Standard atmospheric condition 10-15 minute MIN.Ramp times shall be 2-3 minute,perform 10 such cycles. |
| Salt Spray | No damaged Contact Resistance can not be over Final Value | Temperature:35±2℃, Humidity:95-98%(R.H.),PH: 6.5—7.2 Salt density:(5±1)%, Duration:48H |
5. GLGNET SFP+ Cage FEATURES AND BENEFITS
| 1. Available in single port, ganged and stacked configurations | |||||||||
| 2. Cages in multiple configurations, offering either elastomeric gasket or EMI springs to address EMI containment at higher data rates. | |||||||||
| 3. Belly to belly mounting cages are also available allowing for
design and retrofitting flexibility | |||||||||
| 4. SFP+ connectors are designed to support up to 16 Gbps signal speeds and are backward compatible with SFP. | |||||||||
| 5. Available with heat sink and light pipe options for visual
verification of operability and the ability to dissipate heat then
allow for increased performance and longer transceiver lifecycle | |||||||||
| 6. Pair with 20pin SMT Connector,Compatible with SFP+ Optical Transceiver, supports applications up to 16 Gb/s | |||||||||
| 7. Uses enhanced 20-position connector that is backward-compatible with SFP connectors |
6. GLGNET SFP+ Cage Application
Applications by Protocol
7. GLGNET Advantage
8. 47007-07M321 Stacked 8 Ports SFP+ Cage Connector with Inner Outer Light Pipe Mechnical Drawing
