Mikrotik S+31DLC10D Compatible 10GBASE-LR SMF 1310nm 10km SFP+ Transceiver

Mikrotik S+31DLC10D Compatible 10GBASE-LR SMF 1310nm 10km SFP+ Transceiver

Olinkcom's OLSP851XL-C(I)DS3 transceivers are designed for use in 10Gb/s links up to 300m over Type A1a (50/125 µm multimode) fiber. The SFP+ module supports IEEE 802.3ae 10GBASE-SR and –SW applications along with 10G FC 1200-Mx-SN-I applications for Ethernet Switches or IP Router optical interfaces.

Product Features

• Hot-pluggable footprint
• Electrical interface compliant to SFF-8431
• Compliant with SFF-8472
• 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-LR
• 1310nm DFB transmitter, PIN photo-detector
• Metal enclosure,for lower EMI

Electrical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured at 10.3125b/s with PRBS 2^{31 – 1} NRZ test pattern.

2.20%~80%

3.Under the ER worst case=4.5@ 10.3125 Gb/s with PRBS 2^{31 - 1} NRZ test pattern for BER < 1x10^-12

Compatibility