Home Companies Shenzhen Olinkcom Technology Co.,Ltd

850nm 100m DOM SFP28 Fiber Channel Transceiver MMF Arista Compatible

Shenzhen Olinkcom Technology Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: 4/F, No.2 Building, Delux Science and Technology City, GuanLan Hi-tech park, No.5 Guanyi Road, Longhua District, Shenzhen, China

Contact name:Larry

Inquir Now

Shenzhen Olinkcom Technology Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

850nm 100m DOM SFP28 Fiber Channel Transceiver MMF Arista Compatible

Country/Region china
City & Province shenzhen
Categories HDD Enclosure
InquireNow

Product Details

850nm 100m DOM SFP28 Fiber Channel Transceiver MMF Arista Compatible

 

Arista SFP-25G-SR Compatible SFP28 850nm 100m DOM LC MMF Fiber Channel Transceiver

 

Applications

High-speed storage area networks

Computer cluster cross-connect

Custom high-speed data pipes

General Operating Characteristics

ParameterSymbolMin.TypMax.UnitNote
Data Rate  25.78 Gb/s 
Supply VoltageVcc3.133.33.47V 
Supply CurrentIcc  300mA 
Operating Case Temp.Tc0 70°C 

 

Electrical Characteristics (TOP(C) = 0 to 70 , VCC = 3.13 to 3.47 V)

ParameterSymbolMin.TypMax.UnitNote
Transmitter
Differential data input swingVINPP120 800mVpp1
Tx Disable inputHTDH2.0 Vcc+0.3V 
LTDL0 0.8
Tx Fault outputHTFH2.0 Vcc+0.3V2
LTFL0 0.8
Input differential impedanceRin 100 Ω 
Receiver
Differential data output swingVout,pp340650800mVpp3
Rx Los OutputHVOH2.0 Vcc+0.3V2
LVOL0 0.8

Note:

1. TD+/- are internally AC coupled with 100Ω differential termination inside the module.

2.Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩ resistors on the host board. Pull up voltage between 2.0V and Vcc+0.3V.

3. RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user SERDES.

 

Descriptions

The OLSP852XL-CDS1, 850nm VCSEL 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rateover Multi-mode fiber for link length 100m.

The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.

 

Absolute Maximum Ratings

ParameterSymbolMin.Max.UnitNote
Supply VoltageVcc-0.54.0V 
Storage TemperatureTS-4085°C 
Relative HumidityRH085% 

 

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

 

Ordering Information

Part NumberDescription
OLSP852XL-CDS1SFP28, up to 25.78Gb/s, 850nm, 100m, 0~70℃, with Digital Diagnostic Monitor

Hot Products

QSFP-100G-ER4 Compatible 100G QSFP28 Transceiver 1310nm 40km DOM LC SMF Juniper Networks QSFP-100G...
QSFP28 CWDM4 Transceiver Module DOM 2km LC MMF Support Juniper QSFP28 100G CWDM4 2km LC MMF Optical ...
QSFP28 CWDM4 Transceiver Module DOM 2km LC MMF Generic OEM QSFP28 100G CWDM4 2km LC MMF Optical ...
100GBASE-ER4 QSFP28 1310nm 40km Transceiver, Generic Compatible Generic 100G QSFP28 1310nm 40km This ...
Cisco QSFP-100G-LR4-S Compatible 100GBASE-LR4 QSFP28 Optical Transceiver (SMF, 1295~1310nm, LC, 10km...
Cisco QSFP-100G-PSM4-S 100G QSFP28 Transceiver 100GBASE PSM4 100G QSFP28 1310nm 2km This 100GBASE ...