Home Companies Shenzhen Olinkcom Technology Co.,Ltd

1000BASE-SX 850nm 550m LC SFP Transceiver Module Cisco GLC-SX-MM Compatible

Shenzhen Olinkcom Technology Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: 4/F, No.2 Building, Delux Science and Technology City, GuanLan Hi-tech park, No.5 Guanyi Road, Longhua District, Shenzhen, China

Contact name:Larry

Inquir Now

Shenzhen Olinkcom Technology Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

1000BASE-SX 850nm 550m LC SFP Transceiver Module Cisco GLC-SX-MM Compatible

Country/Region china
City & Province shenzhen
Categories Mobile Phone Straps
InquireNow

Product Details

1000BASE-SX 850nm 550m LC SFP Transceiver Module Cisco GLC-SX-MM Compatible

 

1000BASE-SX SFP Transceiver Module Cisco GLC-SX-MM Compatible 850nm 550m LC

 

Absolute Maximum Ratings

ParameterSymbolMin.Max.UnitNote
Supply VoltageVcc-0.54.0V 
Storage TemperatureTS-4085°C 
Relative HumidityRH085% 

 

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

 

General Operating Characteristics

ParameterSymbolMin.TypMax.UnitNote
Data RateDR 1.25 Gb/s 
Supply VoltageVcc3.133.33.47V 
Supply CurrentIcc5  220mA 
Operating Case Temp.Tc0 70°C 
TI-40 85 

 

 

Electrical Characteristics (TOP(C) = 0 to 70 , TOP(I) =-40 to 85 ,VCC = 3.13 to 3.47 V)

ParameterSymbolMin.TypMax.UnitNote
Transmitter
Differential data input swingVIN,PP250 1200mVpp1
Tx Disable Input-HighVIH2.0 Vcc+0.3V 
Tx Disable Input-LowVIL0 0.8V 
Tx Fault Output-HighVOH2.0 Vcc+0.3V2
Tx Fault Output-LowVOL0 0.8V2
Input differential impedanceRin 100 Ω 
Receiver
Differential data output swingVout,pp250 550mVpp3
Rx LOS Output-HighVROH2.0 Vcc+0.3V2
Rx LOS Output-LowVROL0 0.8V2

 

Notes:

1. TD+/- are internally AC coupled with 100Ω differential termination inside the module.

2. Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩ resistors on the host board. Pull up voltage between 2.0V and Vcc+0.3V.

3. RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user SERDES.

 

Applications

● Gigabit Ethernet

● Fiber Channel

● Switch to Switch interface

● Switched backplane applications

● Router/Server interface

● Other optical transmission systems

Hot Products

QSFP-100G-ER4 Compatible 100G QSFP28 Transceiver 1310nm 40km DOM LC SMF Juniper Networks QSFP-100G...
QSFP28 CWDM4 Transceiver Module DOM 2km LC MMF Support Juniper QSFP28 100G CWDM4 2km LC MMF Optical ...
QSFP28 CWDM4 Transceiver Module DOM 2km LC MMF Generic OEM QSFP28 100G CWDM4 2km LC MMF Optical ...
100GBASE-ER4 QSFP28 1310nm 40km Transceiver, Generic Compatible Generic 100G QSFP28 1310nm 40km This ...
Cisco QSFP-100G-LR4-S Compatible 100GBASE-LR4 QSFP28 Optical Transceiver (SMF, 1295~1310nm, LC, 10km...
Cisco QSFP-100G-PSM4-S 100G QSFP28 Transceiver 100GBASE PSM4 100G QSFP28 1310nm 2km This 100GBASE ...