1746-NO8I AB SLC 500 Analog Output Module 0 to 60 degrees Celsius

1746-NO8I AB SLC 500 Analog Output Module 0 to 60 degrees Celsius

Technical Specifications for 1746-NO8I
Manufacturer Rockwell Automation
Brand AB
Part Number/Catalog No. 1746-NO8I
Series SLC 500
Module Type Analog Output Module
Backplane Current (5 Volts) 120 milliamps
Outputs Four (4)
Backplane Current (24 Volts) 250 milliamps
Output Current range 4 to 20 mA; 0 to 20 mA; 0 to 21 mA; 0 to 21.5 mA
Data Format Scaled engineering units; Scaled for PID; Proportional counts; 1746-NO4 format; User-defined scale
Voltage Output Coding -32,768 to +32,764
Backplane Current (5 Volts) 120 mA; (24 Volts DC) 250 mA
Update Time Class 1: 5 ms; Class 3: 10 ms
Resolution 16 bits
Step Response 1 ms (0 to 95% of full scale)
Step Response 1 ms (0 to 95% of full scale)
Thermal Dissipation 6.6 Watts
Ambient Operating Temperature 0 to 60 degrees Celsius
UPC 10781180054560
Wire Size Two 14 to 24 AWG wire per terminal

OTHER SUPERIOR PRODUCTS

EtherNet/IP Network Configuration
EtherNet/IP Communication Modules
1756-ENBT, 1756-EN2F, 1756-EN2T, 1756-EN2TP, 1756-EN2TPK, 1756-EN2TPXT, 1756-EN2TR, 1756-EN2TRXT,
1756-EN2TSC, 1756-EN2TXT, 1756-EN3TR, 1756-EWEB, 1768-ENBT
CompactLogix 5370 Controllers
EtherNet/IP Adapters
1734-AENT, 1734-AENTR, 1769-AENTR, 1794-AENT, 20-COMM-E, 22-COMM-E, 20-750-ENETR
Embedded Switches
1783-ETAP, 1783-ETAP1F, 1783-ETAP2

The AB 1746-C7 cable is a ribbon power cable that connects controllers and chassis. The spacing between the controllers and chassis are important to note. When using the 1746-C7 cable to connect SLC 500 controllers, the space between them should be between 2.5 and 4 inches. When using the cable to connect AB 1746-P4 power supplies, the maximum spacing between the supplies is 2.5 inches. The 1746-C7 cable itself measures 6 inches in length. It should only be used to connect chassis and controllers side by side, not in a stacked formation with one chassis or controller above the other.

The 1746-C7 cable is best-suited for connecting AB 1746-A4, 1746-A7, 1746-10, and 1746-A13 chassis. The cable can connect these chassis in any combination with each other (for example, the 1746-C7 cable can connect 2 1746-A4 chassis to each other, it can connect 1 1746-A4 chassis to any of the other chassis listed).

FAQ for 1756-PB75
What is the difference between the 1756-PA75 and 1756-PB75?

The 1756-PA75 operates when supplied with 85-264VAC while the 1756-PB75 is powered by an external 18-32VDC supply voltage.

Can I use this power supply as voltage source of panel components?

No. This power supply is intended only for the ControlLogix chassis.

What are compatible ControlLogix chassis for use with the 1756-PB75?

Compatible chassis are 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17.