5301HA1S1V1AM00205AAI1M1C1 Guided Wave Radar Level And Interface Transmitter

 5301HA1S1V1AM00205AAI1M1C1 Guided Wave Radar Level And Interface Transmitter
 
Product Information Of : 5301HA1S1V1AM00205AAI1M1C1

5301 :Guided Wave Radar Liquid Level or Interface Transmitter (interface available for fully submerged probe)

H :4-20 mA with HART communication (default output from factory is HART 5, add option code HR7 for HART 7)

A :Polyurethane-covered Aluminum

1 :½ - 14 NPT

S :Standard : - 15 to 580 psig @ 302°F(-1 to 40 bar @ 150°C) (1A, 2A, 3A, 3B, 4A, 4B, 4S, 5A, and 5B)

1 : 316L SST (EN 1.4404) (ALL / S, H, P, C)

V :Viton® Fluoroelastomer

1A :Rigid Twin Lead(Process connections:Flange / 1½-in., 2-in.Thread / Probe lengths:Min: 1 ft 4 in. (0.4 m) Max: 9 ft 10 in. (3 m) )

M :Metric (meters, centimeters)

002 :(XXX :0-164 ft or 0-50 m)

05 :(XX :0-11 in. or 0-99 cm)

AA : 2 in., 150 lb(Material of Construction: 1, 2, 3, 7, 8, H, D / Operating temperature and pressure :S, H, P, C)

I1 :ATEX Intrinsic Safety

M1 :Integral digital display

C1 :Factory configuration (Configuration Data Sheet required with order, available at EmersonProcess.com/Rosemount)

Notes :

1. Not available with Flame/Explosion-proof approvals (E1, E3, E5, E6, E7, KA, KB, KC, and KD)

2. Process seal rating. Final rating depends on flange and O-ring selection. See “Temperature and pressure limits” on page 30-33.

3. For other materials, consult the factory.

4. 0.79 lb (0.36 kg) standard weight for flexible single lead probe. L=5.5 in. (140 mm).

5. Extra length for fastening is added in the factory.

6. 1.2 lb (0.56 kg) standard weight for flexible single lead probe. L=5.5 in. (140 mm).

OTHER SUPERIOR PRODUCTS

What does "stirring up the market" mean, and why should it be avoided?
   Stirring up the market is what happens when many different suppliers are all contacted regarding the same part. It makes other suppliers believe the part is in much higher demand than it might actually be, resulting in raised prices and lower availability. In order to prevent this costly outcome,WTL highly recommends limiting the number of potential suppliers you reach out to for rare parts.

What forms of payment are accepted?
   We accept all major credit cards (Visa, MasterCard, American Express, and Discover). We also accept wire transfers and PayPal. Checks will only be accepted from customers in the USA. For large orders from repeat customers, terms may be granted pending qualification.

How will shipped to me?
   We generally ship via FedEx, UPS, DHL, and USPS, and we are more than happy to use your preferred carrier or account. We do ship to international (non-USA) customers, as well.

What is the estimated lead time ?
   The primary factor in lead time for the MODEL is availability. If we do not currently have the MODEL in our inventory, we will check with our trusted suppliers for stock. Services such as repair or refurbishment could affect lead time, as well.

Good Service in WTL:  

> We offer high quality, fast delivery, competitive price for Mitsubishi Servo Motor and Servo Drive.

> Please send your RFQ to get the latest price.

> Normally, we will ship the items in 1-2 weeks after receive the payment.

> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.

> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate.

If needed, please contact us for specific prices.