Hot sale Basket Centrifuge equipment to Spin out Alcohol from Dry Material

Description:

The PPTD centrifuge is top discharging, hermetic closure type equipment.


The dry material dip in ethanol, and then use centrifuge for dewatering. The working temperature is very low, around -30~-40 C, to prevent the ethanol from volatilization.


Model PPTD flat-plate centrifuge has got rid of traditional hanging type of leg support and instead it adopts flat-plate counterweight and high-viscosity damping vibration reducer for absorbing vibration. The installation requires no foundation.
Process overview
Operator fills filter bag with milled plant material and places it in the machine.
The centrifuge is then flooded, and bi-directional agitated for full target compound removal.
After the wash, the plant material undergoes a medium duty spin dry till high speed spin dry to remove the liquid as much as possible.
The alcohol wash is then collected to some container for further processing

Collations:

1. Ex proof motor
2. PTFE Seals
3. Touch screen panel with PLC program
4. Inverter control box
5. On spot ex button
6. Closed type filter bags
7.Tri clamp fittings for feed and drain port

Working step:

1. System loading: A pre-loaded closed filter bag is placed into the basket
2. Program Menu: The "Spray Wash" or "Agitation Wash" program is selected on the
HMI where the RPM and cycle times are set to the operator's specifications.

3. Fill: Alcohol is connected from source tank into the centrifuge.
4. The Wash cycle: The plant material undergoes an agitated wash with a set number of
bi-directional agitations
5. System Draining: When the wash cycle is complete, the outlet valve is manually opened
and the liquid drained. The alcohol wash is pumped to a properly rated storage reservoir
for further processing.
6. Spin Dry Cycle: The "Spin Dry" menu is selected on the HMI and the drying cycle is
started. The wet plant solids are spun dry of the remaining alcohol mixture within.
7. System Unloading: Upon completion of the "Dry cycle ,centrifuge is unloaded by taking
the filter bag out from the basket.
8. Repeat Process

Specification:

Our service:

1. 12 months guarantee period from machine arriving date.

2. Abundant spare parts in stock are available to provide.

3. Our technicians could be dispatched for overseas service.

4. 7*24 hours technical consultation.

5. Your workers could get trained both in our factory and yours.

6. Routine tracing till the machine work properly will be done timely.

7. We will remind you to do the normal maintenance.

8. Your suggestions or any comments & reflection would be treated in priority.

9. Marketing team will visit you during our visit in your country if you require.

Custom comments:

1.Favorable Comment

3.Favorable Comment