Advanced 6000LPH Centrifugal Separator Water Separation Machine for Fuel Oil and Diesel Oil

6000LPH Modular Type Centrifugal Oil Water Separator for Fuel Oil and Diesel Oil

Description

Model PDSD6000-B1317Z separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.

The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.

The machine adopts automatic control, and has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.

The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for long time with low vibration, safety and security.

The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.  

Advantages

1. The piston type slag removal and self cleaning automatically discharging

2. belt drive(No second tensioning required)

3. Full hydraulic discharge structure, quicker Respond and slag discharge more thoroughly

4. Internally installed with three sets of programs applied to the Separation of HFO, LO and DO

5. Automatically detection of water sealed water and slag discharge time

6. “No-gravity ring” automatically adjusts “oil water interface”

7. Suitable for the separation of high viscosity(380cSt/50℃)and high density(1010Kg/m3 ) HFO

Principle of Operation

• Suitable for high viscosity (380 CST / 50), high density (~ 1010 kg/m3/15℃) oil
• Master the technology of no-gravity ring automatically adjusting the oil water interface for the first time in China after alfalaval and westfalia.

1——Feed

2——Purified Oil

3——Light phase gauge

4——pressure sensor (Purified Oil)

5——moisture sensor

6——pressure sensor (heavy phase)

7——circulatory solenoid valve

8——draining solenoid valve

Main Technical Specification

Note:The Capacity is based on  0 # diesel oil.

Model select reference

Spot pictures

Processing equipments

Peony Centrifuge has been dedicated to producing machinery and equipments and carrying out facility construction, pursuing the best quality and producing the best product at the same time. We are committed to reward you with a better quality in return for our interest in and faith toward. We will do our utmost for one more stepping forward, based on our infinite services and trust to customers.