|
[China]
Trade Verify
Address: Room 101-301, No. 36, Xingda Road, Yanchuan Community, Yanluo Street, Shenzhen, Guangdong, China
Contact name:Li
Shenzhen Senring Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Electrical Industrial Of Electrical Separate Slip Ring Single Channel USB2.0 IEEE1394 56mm
Description of UH1256-01 USB Slip Ring
SenRing UH1256-01 series single-channel USB rotary joint, with a inner diameter of 12.7mm and an outer diameter of 56mm, can transmit 1 channel of USB2.0 signal through 360 degrees rotation, and can mix transmit 1-20 channels of power/current/signal, and can stably transmit IEEE1394 and various USB signals. The SNU11 series single-channel USB slip ring has advantages such as stable signal transmission, no packet loss, no code, small return loss, and small insertion loss. The slip ring has a hole diameter of 12.7mm and can be used for 360-degree rotation devices with a rotating shaft diameter smaller than 12.7mm. The SNU11 series USB slip ring is SenRing's standard model, which is in stock and has strong versatility. If you need to customize special specifications, please contact SenRing technical personnel.
Features of UH1256-01 USB Slip Ring
1. Standard USB male or female connector, can be customized;
2. Stably transmit 1 channel USB2.0 signal;
3. Can be combined to transmit 1~20 circuits power/signal;
4. Hole size 12.7mm,OD 56mm;
5. Can be combined to transmit power and various signals of IEEE1394,Ethernet,USB2.0,etc.
6. Can be combined to work with power and hydraulic/pneumaic rotary unions;
Product Applications
1. Automation equipment
2. Motion simulator
3. HD security monitor, VR application
Optional
1. Circuit number
2. USB signal
3. HDM size
4. Signal type
Technical Specification of UH1256-01 USB Slip Ring
| USB cable | 1 channels USB2.0 |
| BER(bit-error rate) | 10E-11 |
| Mechanical Data | |
| spec | data |
| working life | SenRing Slip Rings Grade Table |
| Rotating speed | 150RPM |
| working temp. | -30℃∼80℃ |
| work humidity | 0∼85% RH |
| contact material | refer to slip ring grade table |
| housing material | aluminum alloy |
| torque | 0.1N.m;+0.03N.m/6 circuits |
| connector | USB 2.0 male ( female optional) | |
| insertion loss | ≤2db | |
| Electrical Data | ||
| spec | data | |
| power | signal | |
| voltage range | 0∼440VAC/VDC | 0∼440VAC/VDC |
| insulation resistance | ≥1000MΩ/500VDC | ≥1000MΩ/500VDC |
| lead wire spec. | AWG17# Silver-plated teflon | AWG22# Silver-plated teflon |
| lead wire length | standard 300mm(can be customized) | |
| Dielectric Strength | 500VAC@50Hz,60s | |
| Electrical noise | < 0.01Ω | |
| CE certificate | Yes | |
| material | RoHS certificate | |
Part no. description
Drawing of UH1256-01 USB Slip Ring
Standard model list
| Model | power/signal circuits no. | USB channels no. | |||
| signal(2A) | power(5A) | power(10A) | USB2.0 | USB3.0 | |
| UH1256-01-02S | 2 | 0 | 0 | 1 | 38 |
| UH1256-01-0210 | 0 | 2 | 0 | 1 | 38 |
| UH1256-01-08S | 8 | 0 | 0 | 1 | 55 |
| UH1256-01-0810 | 0 | 8 | 0 | 1 | 55 |
| UH1256-01-0210-06S | 6 | 2 | 0 | 1 | 55 |
| UH1256-01-0410-04S | 4 | 4 | 0 | 1 | 55 |
| UH1256-01-14S | 14 | 0 | 0 | 1 | 71.5 |
| UH1256-01-1410 | 0 | 14 | 0 | 1 | 71.5 |
| UH1256-01-0410-10S | 10 | 4 | 0 | 1 | 71.5 |
| UH1256-01-0810-06S | 6 | 8 | 0 | 1 | 71.5 |
| UH1256-01-20S | 20 | 0 | 0 | 1 | 88.5 |
*Remark: Circuits can be combined in parallel for bigger current,N circuits of 10A to get N*10A,such as 2 circuits of 10A in parallel for 20A use.Pls contact the SenRing salesman if you want to customize USB and power/signal circuit no,or mix other signal.
UH1256-01 USB Slip Ring Grade Table
| Grade code | Max rotating speed | working life | contact material |
| C: standard | 400RPM | 20 millions | precious metal |
| D: industrical | 800RPM | 60 millions | gold-gold |
