|
[China]
Trade Verify
Address: Room 101-301, No. 36, Xingda Road, Yanchuan Community, Yanluo Street, Shenzhen, Guangdong, China
Contact name:Li
Shenzhen Senring Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Signal Channel 50GHz Rf Rotary Joint Slip Ring For Transmitting Of Analog And Digital Signals
Description of HF0150-12 High Frequency Rotary Joint
Senring HF0150-12 series rf rotary joint is a singal channel (RF)high frequency slip ring,frequency DC~50GHz,2.4(K)-F connector,work speed 100RPM. HF0150-12 is used transmitting of analog and digital signals,RF Channel,can be customized to combine power/signals.
Features of HF0150-12 High Frequency Rotary Joint
1. It can transmit high-speed and high-frequency (coaxial RF) signals without errors;
2. supports 1 channel of DC to 50GHz high-frequency (coaxial RF) transmission;
3. has excellent insertion loss and voltage standing wave ratio;
4. suitable for satellite antennas, vehicle-mounted devices, radar, microwave antenna test benches and other fields.
Technical Specification of HF0150-12 High Frequency Rotary Joint
| Connector type | 2.4mm Female–2.4mm Female(50Ω) |
| Frequency | DC to 50 Ghz |
| VSWR(max) | 1.3@DC to 10 Ghz 1.4@10 to 26.5GHz 1.7@26.5 to 50GHz |
| VSWR fluctuation(max) | 0.05@ DC to 26.5 GHz 0.2 @ 26.5 to 50 GHz |
| Peak power(max) | 3000W |
| Rotating speed(max) | 150RPM |
| Starting torque(max) | 0.5N.cm |
| Connector axial load(max) | ±0.1N |
| Temperature | -55 to +85℃ (work temperature) -55 to +85℃ (storage temperature) |
| Humidity | 95% (work humidity) 85% (storage temperature) |
| Style | I type |
| Phase WOW ( Max degree) | 1°@DC to 26.5 GHz 2°@26.5 to 50 GHz |
| Insertion loss | 0.30 dB @ DC to 10 GHz 0.50 dB @10 to 26.5GHz 0.90 dB @26.5 to 50GHz |
| Insertion loss fluctuation | 0.1 dB |
| Average power(max) | 50 W @1 GHz 15 W @10GHz 5 W @26.5GHz 3W @50GHz |
| working life | > 10 millions for ref (depends on working conditions) |
| Rotating torque(max) | 0.5 N.cm |
| Connector radial load(max) | ±0.1N |
| IP grade | IP 40 acc. EN 60529 |
| Insulating material | PTFE |
Part no. description
Drawing
FAQ:
Q1: What technical data should be provided for our customized slip ring model.
A: If you want to customize the special slip ring model, you need provide details as below:
1. operatring speed(RPM)
2. the type of installation
3. outline size
4. channels(the No. of single wire besides cable)
5. rated voltage & current for power rings and signal rings
6. the signal type and related
parameters(very important)
7. operating temperature h.IP(sealing requirements)
Q2: How long is your production lead time?
A: It needs 7 to 15 days for standard products, 10 to 20 days for simple customized products,
15 to 40 days for complex customized products.
