|
[China]
Trade Verify
Address: Room 101-301, No. 36, Xingda Road, Yanchuan Community, Yanluo Street, Shenzhen, Guangdong, China
Contact name:Li
Shenzhen Senring Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Description of 31002006 Hollow Shaft Slip Ring
The SenRing P31002006 series pneumatic rotary joint is a dual-passage rotary joint that can rotate 360 degrees to transmit two channels of compressed air, steam, vacuum, and other gas media. It supports 6mm and 8mm air pipes. The 3502 series rotary pneumatic joint not only transmits gas, but can also mix and transmit various electric currents ranging from 2A to 800A. It is characterized by its small size, light weight, low torque, and multiple gas passages that do not interfere with each other.
A hollow 100mm pneumatic rotary joint is a device that enables the transfer of compressed air or other gasses while allowing a rotating shaft to pass through its center. It is commonly used in pneumatic or hydraulic systems where it is necessary to transfer gas or fluid to a rotating component such as a spindle or a chuck.
The rotary joint typically consists of two parts, a stationary part and a rotating part. The stationary part is mounted to the fixed component of the system, while the rotating part is mounted to the rotating component. The two parts are connected by a set of seals that prevent the gas or fluid from leaking out.
Features of 31002006 Hollow Shaft Slip Ring
1. It can mix power lines, signal lines, Ethernet, USB, industrial bus, control lines, solenoid valves, and sensing lines.
2. The standard installation form is flange, and hollow shaft installation can be customized.
3. The media that can be passed through are compressed air, hydrogen, nitrogen, chemical mixed gas, steam, cooling water, hot water, hot oil, petroleum, sulfuric acid, beverages, etc.
Part no. description
Drawing
Standard model list
| Model | Passages | Port Size | Pipe Size |
| 31002006 | 2 Passages | G1/8" | 6∼8mm |
Drawing
Standard model list
| Part NO. | Passages | Port Size | Pipe Size | Power Circuits(10A) | Signal Circuits(5A) | Length L(mm) |
| 31002006-0605 | 2 Passages | G1/8" | 6∼8mm | 0 | 6 | 64 |
| 31002006-0610 | 2 Passages | G1/8" | 6∼8mm | 6 | 0 | 64 |
| 31002006-1205 | 2 Passages | G1/8" | 6∼8mm | 0 | 12 | 88 |
| 31002006-1210 | 2 Passages | G1/8" | 6∼8mm | 12 | 0 | 88 |
| 31002006-1805 | 2 Passages | G1/8" | 6∼8mm | 0 | 18 | 112 |
| 31002006-1810 | 2 Passages | G1/8" | 6∼8mm | 18 | 0 | 112 |
| 31002006-2405 | 2 Passages | G1/8" | 6∼8mm | 0 | 24 | 136 |
| 31002006-2410 | 2 Passages | G1/8" | 6∼8mm | 24 | 0 | 136 |
Technical Specification of 31002006 series slip ring
| Passages(Gas) | 2 passages |
| Pipe Size | 6~8mm pipe, G1/8"; Port |
| Mechanical Data | |
| spec. | data |
| Working life | 20millions for ref(depends on working conditions) |
| Max. Operating Speed | 250RPM continously, 1000RPM intermittently |
| Working temp. | -30°C~80°C |
| Work humidity | 0~85% RH |
| Contact Materia | Precious Metal |
| Housing Material | aluminum alloy |
| IP Grade | IP51 |
| Max. Operating Pressure | Positive Pressure 1Mpa, Vacuum -90kPa | |
| torque | <0.2N.m | |
| Electrical Data | ||
| spec. | data | |
| Power | Signal | |
| Voltage range | 0~440VAC/VDC | 0~440VAC/VDC |
| Insolution resistance | <500MΩ/300VDC | <500MΩ/300VDC |
| Lead wire spec. | AWG17# Silver-plated teflon wire | AWG22# Silver-plated teflon wire |
| Lead wire length | standard 250mm (can be customized) | |
| Insolution resistance | 500VAC@50Hz,6s | |
| Electrical noise | <0.01Ω | |
