Active Member
|
[China]
Address: 1702, Dingcheng international building, Zhonghang Road, Futian District, Shenzhen
Contact name:DANDAN
Shenzhen Sai Collie Technology Co., Ltd. |
|
|
Product Status | Active | |
Switch Circuit | SPDT | |
Multiplexer/Demultiplexer Circuit | 2:1 | |
Number of Circuits | 1 | |
On-State Resistance (Max) | 2.4Ohm | |
Channel-to-Channel Matching (ΔRon) | 50mOhm | |
Voltage - Supply, Single (V+) | 5V ~ 16.5V | |
Voltage - Supply, Dual (V±) | ±4.5V ~ 16.5V | |
Switch Time (Ton, Toff) (Max) | 110ns, 140ns | |
-3db Bandwidth | 135MHz | |
Charge Injection | -16pC | |
Channel Capacitance (CS(off), CD(off)) | 19pF, 44pF | |
Current - Leakage (IS(off)) (Max) | 500pA | |
Crosstalk | -64dB @ 1MHz | |
Operating Temperature | -40°C ~ 125°C (TA) | |
Mounting Type | Surface Mount | |
Package / Case | 8-WFDFN Exposed Pad, CSP | |
Supplier Device Package | 8-LFCSP-WD (2x3) | |
Base Product Number |
ADG1612BCPZ-REEL7 Electronic IC Chip 0.2Ω
Shipping overseas is convenient with the electronic component
packed in 8-WFDFN Exposed Pad, CSP. In order to provide high
reliability, an advanced packaging method Tape & Reel (TR) is
used. Mounted in Surface Mount is this multiplexer. Multiplexers
and demultiplexers have a number of circuits 2:1. Operating
temperature extended to -40°C~125°C TA. In total, there have been 8
terminations. High-quality output is provided by the electronic
component's 1 channels. Turning on and running the electrical part
should be easy with a 15V voltage supply. 8 pins are injected to
the electronic part body. A SPDT switching circuit is used for
these analog switches.
Try searching for the analog switch ic with ADG1419 if you are looking for variants. This digital multiplexer has 2.4Ohm internal resistance. To find out what the functions of 8 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 5V. A digital multiplexer may suffer damage if voltage is applied above 190μA. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. It is recommended that you attach at least 4.5V to your dual power supply. This electrical part is compatible with 12V operating voltages. A 1 input needs to be operated. A 135MHz-bandwidth can be used for data transfer. There is 2.4Ohm resistance between Drain and Source for this electronic part. An output of 2 is provided by the digital multiplexer. Resistance Flatness.
FEATURES
2.1 Ω on resistance
0.5 Ω maximum on-resistance flatness at 25°C
Up to 390 mA continuous current
Fully specified at +12 V, ±15 V, ±5 V
No VL supply required
3 V logic-compatible inputs
Rail-to-rail operation
8-lead MSOP and 8-lead, 3 mm × 2 mm LFCSP
Why buy from us >>> Fast / Safely / Conveniently
• SKL is a Stock keeper and trade company of Electronic components
.Our branches office include China, Hong Kong, Sigapore , Canada .
Offer business, service, resourcing and information for our global
member.
• Goods are ensured the highest quality possible and are delivered
to our customers all over the world with speed and precision.
How to buy >>>
• Contact us by email & sent your inquire with your Transport
destination .
• Online chat, the commissioner would be responded ASAP.
Service >>>
• Forwarder Shipment to world-wide, DHL ,TNT ,UPS,FEDEX etc. buyer
don`t need to worry about shipping problem
• We will try to respond as quickly as possible. But due to time
zone difference, please allow up to 24 hours to get your mail
replied. The products were tested by some devices or software, we
ensure that there is no quality problems.
• We are committed to providing fast, convenient and safe
transportation service to global buyer.
