|
[China]
Trade Verify
Address: No.265 of zhongshan road ,shijiazhuang city ,heibei province ,china 050000
Contact name:zhijing.gao
Huihao Hardware Mesh Product Limited |
|
Verified Suppliers
|
|
|
Lacing Anchor Cupped head weld pin to secure insulation inside fabricated blankets
1. Certification: ISO9001
2.Material: Low Carbon Steel, material specifications or
certification available.
3.Finish: Mild Steel pins are galvanized/coated, washer is
galvanized.
4.Annealing: All steel pins are fully annealed unless otherwise
specified.
5.Paper Insulating Washers:Available for welding through foil faced insulation.Paper insulating washers can be
ordered separately or factory installed.
6.Compatibity: All pins are compatible and recommended for use with
all brands of CD stud welding equipment
| common size of duct liner Cupped Head Weld Pin | ||
| Cupped Head Weld Pin diameter | base size | length |
| 2.7mm | 25mm, 30mm | 15-250mm |
| 3mm | 25mm, 30mm | 15-250mm |
| 3.4mm | 25mm, 30mm | 15-250mm |
| Lacing Anchor Cupped head weld pin to secure insulation inside fabricated blankets | Standard of materials |
| Low Carbon Mild Steel 4.8 (weldable) Stainless Steel A2-50 (weldable) Aluminium Alloy AlMg3 Pure Aluminium Lead Free Brass 4.8 (weldable) | EN 20898-1 EN 573-3 |
| Features of Lacing Anchor Cupped head weld pin to secure insulation inside fabricated blankets | |
| BETTER PLATING | weldpin shanks Zinc and Chromate plated exceeding SMACNA standards and providing a professional appearance.Quilting Cup Head Insulation Pins are copper plated. |
| REDUCED DOWN TIME | Consistent point quality reduces frequency of machine adjustments. |
| STRONGER WELDS | Hardened steel point assures positive electrical contact for complete sheet to pin fusion. |
| CORROSION RESISTANCE | Plating exceeds current SMACNA standards for corrosion resistance. |
| TEMPERATURE RANGE | Quilting Cup Head Insulation Pins function properly over normally accepted operating range of temperatures of 0 degrees C to 121degrees C and are not adversely affected at temperatures of 0 degrees C to 287 degrees C. |
| VIBRATIONS | Quilting Cup Head Insulation Pins will not fatigue or be physically affected by vibrations normally found in high velocity air handling systems. |
Instal Of Lacing Anchor Cupped head weld pin
Metal Cupped Head Pins type of Capacitor Discharge (CD) pin is welded through the insulation, allowing
the fabrication to be done in one easy step. The head of the pin is attached to the nail, so there is no need
to add a washer.
Metal Cupped Head Pins Reduced labor time - Neat, finished
appearance
Recommended assembly method:
1.Work surfaces should be clean and dry, free of dust, grease, oil
and any other loose matter.
2.Remove the protective release paper taking care not to touch the
adhesive.
3.Place the hanger in the required position and press the base
against the surface to be insulated
4.Insulation can be impaled immediately and firmly locked with
fastening clips but maximum strength of adherence
is achieved after 24 hours
