2-1/2" Galvanized Steel Rock Wool Insulation Stick Pins With Washers

Details of Rock Wool Insulation Stick Pins :

Insulation stick pins are used to fasten insulation material to walls and ceilings ,it is rivets by a metal

base and pin ,each metal base has a foam adhesive covered with a release paper ,Self stick pins are

used to fasten insulation materials to sheet metal quickly and easily ,they works best on new or clean

sheet metal ,once the insulation material is pierced onto the pin ,a locking washer or a dome cap can

be installed to hold the insulation material

	Rock wool insulation stick pins    Base material :mild steel with double side tapes Base size :50mmx50mm Pin material :galvanized steel ,copper coated ,aluminum  Pin diameter :2.7mm Pin length :19mm,25mm,32mm,42mm, 51mm, 63mm,76mm, 89mm,105mm, 114mm,125mm,140mm,165mm
	Self locking washer  Material:Galvanized steel  Type :Round type ,square type Size:20mm,25mm,30mm,32mm, 38mm Usage :for fixing insulation pins
	Metal dome cap washer  Top material : aluminum ,stainless steel ,galvanized steel  Washer inside material : stainless steel ,galvanized steel  Size :22mm,27mm,32mm,40mm Usage: for the end of insulation pins

Specification of Rock Wool Insulation Stick Pins :

Application of Rock Wool Insulation Stick Pins :

speration Temperatures: 15 to 25 ℃
Working Surface should be clean and dry, free of dust, grease, oil and any other loose matter.
Insulation can be impaled immediately and firmly locked with fastening washer.
The Maximum strength of adhesive is achieved after 24 hours

Advantage of Rock Wool Insulation Stick Pins :

·Removable and Reusable ·Simple and Quick Installation ·Long Lasting and Durable ·No Tools Required ·Weatherproof, Chemical Resistant, UV Resistant ·No Equipment Downtime ·Blocks the Flame Path and Retards Heat Flow

Rock Wool Self Stick Insulation Pins Buying guide :

1. choose annealing wire for the pin

soft wire is easy to bend when fixing rock wool material with self locking washer

2.common size is 2.7mm ,3.0mm wire to make the pin

2.7mm and 3.0mm wre diamerer is standard size for insulation pin ,at the same time ,the diameter is based

on the pin length

3. the base is square hardness metal sheet

hardness metal sheet is more firmly,no-shedding ,non-deformable

4.What’s the right length of insulation pins?

You should choose the length taking several factors into consideration. The first item to consider is the

insulation thickness. Your insulation stick pins need to be longer than insulation material to retain them

properly. How much longer? Usually 10-20mm longer should be sufficient.