|
[China]
Trade Verify
Address: No.265 of zhongshan road ,shijiazhuang city ,heibei province ,china 050000
Contact name:zhijing.gao
Huihao Hardware Mesh Product Limited |
|
Verified Suppliers
|
|
|
36mm Tile Backer Board Washers are used to secure tile backer boards, cement board,
XPS insulation boards, and other insulations foam to wooden floors or stud walls.
| material | thickness | diameter | center hole |
| galvanized steel | 0.6mm | 36mm | 5mm |
1. 36mm Tile Backer Board Washers are countersunk, allowing the screw head to pull into the board with the outer rim of the washers remaining flush with the board surface.
2. 36mm Tile Backer Board Washers are suitable for tile backer boards, wooden floors, stud walls, as the washers help maintain the flat board surface ready for the secure application of subsequent layers such as tile adhesives and plaster.
3. 36mm Tile Backer Board Washers have a perforated surface, which provides maximum board surface exposure. This allows standard adhesives and plasters to adhere to the board surface, minimizing the risk of surface delamination or damage.
4. 36mm Tile Backer Board Washers are stainless steel 304 or galvanized steel material to protect them from corrosion and minimize any chance of degradation over time.
5. 36mm Tile Backer Board Washers are easy to fix & secure. | |||
 |
1. When using the 36mm tile backer board washers to fix tile backer boards to walls and floors, it is recommended to use 15 washers per 1200 x 600mm board. 2. This is only a guide and specifically it's depended on the type, thickness, sub surface and what is to be put onto the board. 3. It is the installers responsibility to use the correct number of washers to hold the tile backer board in place. | |
 |  |
 | Item: 36mm Tile Backer Board Washers Material: Stainless Steel (galvanized steel also available) Size: 36mm Center Hole: 5mm Thickness: 0.6mm |
 | Item: 35mm Tile Backer Board Washers Material: Galvanized steel (stainless steel also available) Size: 35mm Center Hole: 5mm Thickness: 0.7mm |
 | Item: 4-Claw Tile Backer Board Washer Material: Galvanized steel (stainless steel also available) Size: 32mm Center Hole: 5mm Thickness: 0.6mm |
1. 50 pcs/bag, 100 pcs/bag, 200 pcs/bag or as your requirement 2. paper carton 3. wood pallet |
  |
1. Are you a manufacture or a trader?
We are a manufacture, located in Hebei province, China.
2. Do you support product customization?
Yes, the material, the surface finish, the size, all could be
customized.
3. Do you support package customization?
Yes, the package could be customized according to your need.
4. Can i get samples?
Yes, samples for quality confirm are supported.
5. Can you accept small orders?
Yes, for common size, we could accept small orders.
